83 cutlass ly6/4l80/s60
#1
83 cutlass ly6/4l80/s60
Finally started putting my car together. 83 cutlass with a 2010 ly6 with mast motorsports ss cam and spring package. rebuilt 4l80 with trans go2, and a strange s60 with 3.73s and s trac. wilwood disc brake package. I used hooker mounts, crossmember, 17/8 long tubes darkside ceramic. waiting on 3 in exhaust, spohn control arms
Last edited by jimmyg; 02-02-2016 at 09:38 PM.
#2
Finally started putting my car together. 83 cutlass with a 2010 ly6 with mast motorsports ss cam and spring package rebuilt 4l80 with trans go2, and a strange s60 with 3.73s and s trac wilwood disc brake package. I used hooker mounts, crossmember, 17/8 long tubes darkside ceramic waiting on 3 in exhaust, spohn control arms
#5
Trending Topics
#11
Started the front drive. Also fixed crack in heater box
Modified truck bracket with dirty dingo idler relocation bracket I'm also going with holley Ac bracket and r4 compresser
5 in pulley from buick lucerne
Cracked heater box taking the old motor out so I used some fiberglass Matt and a little plastic. Keeping ac
Modified truck bracket with dirty dingo idler relocation bracket I'm also going with holley Ac bracket and r4 compresser
5 in pulley from buick lucerne
Cracked heater box taking the old motor out so I used some fiberglass Matt and a little plastic. Keeping ac
#12
Front drive is finished! 2010 camaro water pump, truck ps/alt bracket, holley Ac bracket. Orig ps lines will work
Ls3 intake just sitting there gotta finish heater box first
Ls3 intake just sitting there gotta finish heater box first
#13
You are moving along at a good pace jimmyg, nice work. Are your stock A/C lines going to work, or do you have to get parts off of a later model G-body?
#15
I think the Ac lines will work with a little tweaking . The compresser is clocked a little different and is closer to heater box now . I have 2 sets so I was going to try to bend old one to see if it would go then maybe take to Ac shop to have them shorten rubber part of hose. How did u guys connect yours? And also what did u do about plugs being different? Can u order pig tail?
#16
I think the Ac lines will work with a little tweaking . The compresser is clocked a little different and is closer to heater box now . I have 2 sets so I was going to try to bend old one to see if it would go then maybe take to Ac shop to have them shorten rubber part of hose. How did u guys connect yours? And also what did u do about plugs being different? Can u order pig tail?
#17
Progress with some pics
Got the rear end installed today. Now I'm just waiting on brake lines to connect the wilwood calipers to my existing lines
Nice having a lift in your garage. It's old but works great
Old 7.5 pos
Strange s60 with tracloc and 3.73s
Fuel system showed up. This should keep me busy for a while
Nice having a lift in your garage. It's old but works great
Old 7.5 pos
Strange s60 with tracloc and 3.73s
Fuel system showed up. This should keep me busy for a while