Alwhite00

iTrader: (1)

I just dropped the drive train in my 67 Chevelle and I realize I should have put the fittings on the trans before I dropped it in but I think I can get at them easily enough. What size threads are in the trans for the fluid lines? I want to find some sort of 90 deg fitting if possible.

Thanks

76larkman

Im not sure but a good guy at a tranny shop will probably set you up.

Hawk465

iTrader: (10)

If you are going to run AN braided hose the fittings are 1/4" NPSM to -6 AN, Russell part number 640520. Put 45 degree fittings on your hose ends and you should be good to go.