korndawg

I'm starting to get pieces bought/ordered for my LSA swap into my 72 Chevelle and I'm stuck on what to do for a heat exchanger. Obviously I'm still learning about heat exchagers. In looking, i don't see where it's possible to mount a Fluidyne T-Rex or any low mount HX since I have factory AC. Also, does the HX sit in between the Radiator and Condenser? If so, it looks like i have about 3 inches between the 2 is all.

1989GTA

I was thinking of going the LSA supercharger route on my 65 Skylark but the intercooler was going to be too big on an obstacle for me to deal with. I want to keep my A/C.

Z28-4-Chris

iTrader: (2)

Lots of people use the 2012+ GT500 hx because its thick and often replaced

Sir_rb

I know this is an older thread, but did you even find a solution? I have vintage air AC condenser/accumulator and tranny cooler mounted up front

G Atsma

Last time Korndawg was here was in June this year. He MIGHT check back in...

jimmyg

I have a gt 500 afco heat x with fans , huge trans cooler , and factory Ac condenser in my 83 cutlass . Works fine .

130fe

iTrader: (14)

Have you looked at this AFCO heat exchanger?

https://www.crracing.com/product/che...-air-condenser