HELP LSX in 67 II...
06-13-2006, 11:01 AM
#1
Teching In
Thread Starter
Join Date: Jun 2006
Location: SC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
HELP LSX in 67 II... Hey all,
New to the site and very excited.
I am currently building an LSX 67 Chevy II G-Machine. I am utilizing the factory front end and need any and all information on items such as motor mounts, transmount, oil pan, headers, guages... I have read where alot of you guys use after market front ends, but I just didn't have the $$$$..
Any and all help will be very much appreciated!!!!
Thanks in advance,
MAX
New to the site and very excited.
I am currently building an LSX 67 Chevy II G-Machine. I am utilizing the factory front end and need any and all information on items such as motor mounts, transmount, oil pan, headers, guages... I have read where alot of you guys use after market front ends, but I just didn't have the $$$$..
Any and all help will be very much appreciated!!!!
Thanks in advance,
MAX
06-13-2006, 09:57 PM
#2
One of our sponsors BRP ------->
Sells the motor mounts and tranny crossmember 4L60 and T-56 for the swap.
On the headers from what I've read most our building there own. Of course any kind of header in a Duece is going to be a challenge. If you can get past that everything else should be pretty much cake.
That is going to be an awesome ride. I've always wanted a 67 Chevy II with an LS1. Good Luck with the swap and keep us updated.
Sells the motor mounts and tranny crossmember 4L60 and T-56 for the swap.
On the headers from what I've read most our building there own. Of course any kind of header in a Duece is going to be a challenge. If you can get past that everything else should be pretty much cake.
That is going to be an awesome ride. I've always wanted a 67 Chevy II with an LS1. Good Luck with the swap and keep us updated.
Last edited by skewba98z28; 06-13-2006 at 10:05 PM.
06-15-2006, 08:19 AM
#4
Teching In
Thread Starter
Join Date: Jun 2006
Location: SC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the feedback.......will update as the build progresses.....
I'll post some pics as they become available.......
Awesome site........
I'll post some pics as they become available.......
Awesome site........
Last edited by MAXIT; 06-15-2006 at 08:34 AM.
06-15-2006, 08:59 AM
#5
Madman also made some very nice parts:
https://ls1tech.com/forums/conversions-swaps/271478-chevy-2-headers.html
LS1tech is listed as a sponsor on http://www.pro-touring.com/ They have some good info.
https://ls1tech.com/forums/conversions-swaps/271478-chevy-2-headers.html
LS1tech is listed as a sponsor on http://www.pro-touring.com/ They have some good info.
06-15-2006, 12:42 PM
#6
TECH Apprentice
Join Date: May 2006
Location: Kansas City metro area
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I just lowered the LS1 in my '62 Chevy II and it went well with a TCI front end. I am not sure I would want to try it with the stock front end. They are a little pricey but you gain a lot. Rack & pinion, strength, room... It has been a learning experience though. 
06-16-2006, 08:41 AM
#7
TECH Fanatic
iTrader: (1)
Join Date: Dec 2003
Location: Farmington Hills, MI
Posts: 1,098
Likes: 0
Received 0 Likes
on
0 Posts
John Parsons has done a good job of documenting his '67 Chevy II build. Actually, he does some writing for PHR so some of his work has been published. His website is http://www.iimuchfabrication.com/. He has also posted a lot of things here and at pro-touring.com where he is a moderator. Here is his article from PHR on the design of his front suspension. You said that you wanted to use the stock front end, so it might just be an interesting read for you. Good luck with your project.
