Fitting an LS1 or LS2 into an '86 Iroc
07-09-2006, 04:16 PM
#1
Teching In
Thread Starter
Join Date: Jul 2006
Location: Topeka, KS
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Fitting an LS1 or LS2 into an '86 Iroc I am sure this has been done a million times. But, i am new to the "new school" technology. How straight forward is this swap? I has a 305 TPI right now. THanks for any advice.
07-09-2006, 04:39 PM
#2
you might want to check out the engine swap section on www.thirdgen.org as they have a lot of information about this. if you scroll down in this section theres also a thread called "LSx into Third Gen Resource" or something similar.
finally, another great bet is to go to www.mofbody.com as its a local fbody forum to you (im a member from kansas city). theres a member there that swapped an LS1 and t56 into his 91 GTA Trans Am that will be of great help to you as well.
*EDIT* that mofbody.com members name is GTA91 and i do believe hes a member on here as well.
finally, another great bet is to go to www.mofbody.com as its a local fbody forum to you (im a member from kansas city). theres a member there that swapped an LS1 and t56 into his 91 GTA Trans Am that will be of great help to you as well.
*EDIT* that mofbody.com members name is GTA91 and i do believe hes a member on here as well.
07-10-2006, 11:26 PM
#3
you can search online for people who've done the swap.
one example is these guys- F body motorsports.
While their service for shipping products can be less than desirable, they do a decent job of illustrating their LS1 into a 3rd gen install
scroll down and check it out
http://www.fbodymotorsports.com/91ls1page1
I hope this is helpful
one example is these guys- F body motorsports.
While their service for shipping products can be less than desirable, they do a decent job of illustrating their LS1 into a 3rd gen install
scroll down and check it out
http://www.fbodymotorsports.com/91ls1page1
I hope this is helpful
