chris-m

If anyone can help with a part number it would be aprpeciated as i hit a snag on my carb conversion (GM carb manifold) to LS1. I have a set of original rubber (8 off) individual gaskets which must have come from the original efi manifold but arent right for this application. i believe Felpro ? do a paper type gasket to suit but i cant seem to find any part no's?
any help appreciated.
chris

69LT1Bird

iTrader: (1)

What brand intake are you using, some use the rubber individual O ring style.

chris-m

its a GM performance intake, looks like a flush face which would suit a thin card/paper type gasket. the rubber o.e gaskets dont appear to be right for this manifold.
rgds

69LT1Bird

iTrader: (1)

The GM part number for the intake gasket kit is: 19156564
The kit includes the left and right gaskets.

chris-m

brilliant, many thanks for your help.
regards

topher455

iTrader: (6)

Or these http://www.jegs.com/webapp/wcs/store...0002_345808_-1

topher455

iTrader: (6)

those were.045
these are .030 http://store.summitracing.com/partde...1&autoview=sku

I had alot of trouble finding them when I put my intake on. For what the intake cost they should have been in the box and plated in gold IMO.

DCx

iTrader: (12)

glad i went with the victor intake. it uses the individual port gaskets.

Horsepwraddict

iTrader: (12)

i ordered the felpro's (1312-1) through my local parts store. infact i have a set im not using, still wrapped if anyone wants to buy them.

chris-m

pm sent!
thanks for the help guys