Help me bring life to my 55 Chevy
#1
Teching In
Thread Starter
Join Date: Jun 2004
Location: Forney, TX
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Help me bring life to my 55 Chevy
Ok folks, I need some help from all of you great wizzards. I am doing the LS (havent decided which one) into my 55. I need some physical dimensions.
All I have now are block (empty and dead - see pic), heads and intake to do the mock-up. Can someone please measure from the face of the block (not the cover)to the outside edge of the balancer (sans pully/s) and also what diameter is the balancer? I am trying to decide what engine setback to use.
TIA
All I have now are block (empty and dead - see pic), heads and intake to do the mock-up. Can someone please measure from the face of the block (not the cover)to the outside edge of the balancer (sans pully/s) and also what diameter is the balancer? I am trying to decide what engine setback to use.
TIA