No spark on the #2 coil
01-17-2008, 08:51 AM
#1
TECH Apprentice
Thread Starter
Join Date: May 2005
Location: Huntsville, AL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
No spark on the #2 coil A friend of mine did a ls1 swap on a 3rd gen Camaro. It runs, but there is no spark on the number2 coil. The connector haas power, but no spark signal going to it. Ay suggestions?
01-19-2008, 07:12 AM
#5
On The Tree
iTrader: (4)
Join Date: Mar 2007
Location: Decatur, AL
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
found the problem. turns out that my painless harness people did not do their job right. the red w/ white stripe wire going from the pcm to the coils connector was never crimped in the connector at the coils connector plug. i will be calling painless to let them know of this. not that they will care, but they need to know.
01-29-2008, 08:15 AM
#6
FormerVendor
Join Date: Jan 2008
Location: Fort Worth, Texas
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
No spark on #2 coil My name is Gary Wright. I am the National Sales Manager at Painless. Just wanted to say we DO want to know about your harness issue. We work very hard to produce a quality harness. Each completed harness is connected to a test board that tests continuity on every circuit. Please contact our Tech Support line at 800 423 9696. Speak with any of the techs and discuss what you found. If you have the original box please have it handy. There is a work order number on the box. From that we can see which employees did the different operations in the construction process. This enables us to check for any manufacturing problems or determine if it was just a random error. Sorry you had a problem with the harness. I know how frustrasting that can be.
Gary
Gary