Need air intake help on LS1 swap
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Aug 2007
Location: Palestine Texas
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Need air intake help on LS1 swap
Do any of you guys know what the best route needs to be taken with this? I'm working on a 95 Z28 LS1 swap and I'm looking for the right intake to put on thats better than stock. I'm retaining the stock 90 degree elbow but i wanna ditch the rest of the junk. any help here would be great!
#4
TECH Fanatic
iTrader: (4)
Join Date: Mar 2007
Location: Twin Cities, MN
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
Look here-
https://ls1tech.com/forums/showthrea...ght=air+intake
Odd one here-
https://ls1tech.com/forums/showthrea...ght=air+intake
Here is a source-
https://ls1tech.com/forums/showthrea...ght=air+intake
Those are a few quick hits with the search "air intake" I would also look at "intake plumbing" and maybe a few other ideas.
https://ls1tech.com/forums/showthrea...ght=air+intake
Odd one here-
https://ls1tech.com/forums/showthrea...ght=air+intake
Here is a source-
https://ls1tech.com/forums/showthrea...ght=air+intake
Those are a few quick hits with the search "air intake" I would also look at "intake plumbing" and maybe a few other ideas.
#6
TECH Addict
iTrader: (70)
Join Date: Apr 2007
Location: Amarillo, Texas
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
I am going to try to use a c5 dual air intake system on my 95 ls1 swap If that doesnt work I will just use my aftermarket lt1 system. I also agree with intakehoses.com. Very good site with lots of options.