ls3 wire harness for crate engine install
04-24-2008, 03:48 PM
#1
Teching In
Thread Starter
Join Date: Apr 2007
Location: fayetteville, nc
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
ls3 wire harness for crate engine install ok I've been looking at doing an crate LS3 swap into my 98 F-body. I' know I have a different pcm then the rest of the LS1 F-bodies out there. so I'm looking at just doing the whole ecu and harness swap. so has anyone delt with this harness?
LS376-480-Controller-Kit-19201327-P2221C242
I'm just looking for more info like what after market guages I can use and how difficult would it be to install in a 98 Z28 T56 Camaro?
LS376-480-Controller-Kit-19201327-P2221C242
I'm just looking for more info like what after market guages I can use and how difficult would it be to install in a 98 Z28 T56 Camaro?
04-24-2008, 04:21 PM
#2
No able to really help you, but I have a question or concern...
It is in regard to being smog legal, if your care about that.. What are the smog / swap law there in NC.?.. if you swap the ECU out the 98' ECM for another one and they test for ODBII VIN information, you would fail..!?.. unless you were able to program your old VIN.
Just wondering if it is a problem to be concern with or how you are going to get around it ?
It is in regard to being smog legal, if your care about that.. What are the smog / swap law there in NC.?.. if you swap the ECU out the 98' ECM for another one and they test for ODBII VIN information, you would fail..!?.. unless you were able to program your old VIN.
Just wondering if it is a problem to be concern with or how you are going to get around it ?
04-24-2008, 08:50 PM
#5
Teching In
Thread Starter
Join Date: Apr 2007
Location: fayetteville, nc
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
04-24-2008, 10:47 PM
#6
TECH Apprentice
iTrader: (8)
Join Date: Jan 2004
Location: McKinney, TX.
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
My motor is in a mustang and I used all aftermarket gauges. The harness comes with a bulkhead connector that has temp output, oil pressure output, VSS, tach output and a bunch more. I just used the VSS and tach signals and the rest of the gauges had their own sensors. The harness even came with a male plug for the bulkhead connector so you just crimp the pins on your wires and slip them in the connector....Looks factory.
Trending Topics
04-25-2008, 02:42 PM
#9
11 Second Club
Join Date: Feb 2008
Location: TN
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
LS3 480HP came off BO and have been shipping since middle of March. I've had one in hand since then and I was number 26 on BO list. Don't know about GM harness as don't plan on using it.
04-26-2008, 09:45 PM
#11
Teching In
Thread Starter
Join Date: Apr 2007
Location: fayetteville, nc
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
06-06-2018, 08:20 AM
#12
Teching In
Join Date: Jun 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Ls3 swap ok I've been looking at doing an crate LS3 swap into my 98 F-body. I' know I have a different pcm then the rest of the LS1 F-bodies out there. so I'm looking at just doing the whole ecu and harness swap. so has anyone delt with this harness?
LS376-480-Controller-Kit-19201327-P2221C242
I'm just looking for more info like what after market guages I can use and how difficult would it be to install in a 98 Z28 T56 Camaro?
LS376-480-Controller-Kit-19201327-P2221C242
I'm just looking for more info like what after market guages I can use and how difficult would it be to install in a 98 Z28 T56 Camaro?
