first gen camaro question
#1
first gen camaro question
i have been searching/lurking this forum/site and cant get a good answer. i am building a 67 camaro with an LS3 w/4l60e. what crossmember and engine mount is works best.modified t400 crossmember? i have found answers for the t56 swap but not the auto.my first post here but i thought this was the best place.
#4
There are several options, BRP Hotrods, ATS, STS, etc. Below is information from the forum that would be helpful. The swap has been done several times....though not with the ls3....however it should be no different.
https://ls1tech.com/forums/conversions-swaps/472609-lsx-into-67-69-camaro-basics.html
https://ls1tech.com/forums/conversions-swaps/684612-story-our-ls1-swap-into-67-camaro.html#post6791708
https://ls1tech.com/forums/conversions-swaps/472609-lsx-into-67-69-camaro-basics.html
https://ls1tech.com/forums/conversions-swaps/684612-story-our-ls1-swap-into-67-camaro.html#post6791708
#5
TECH Resident
iTrader: (29)
Join Date: Sep 2007
Location: East Los Angeles CA
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
email this guy, he is the vp of ops at total cost involved...i got my whole suspension with them.... sal@totalcostinvolved.com ask him for a catalog....he hook me up
#7
TECH Addict
iTrader: (12)
TH400 crossmember is offset 2" to the passenger side. TH400s were used behind BBs and their exhaust manifold wouldnt clear steering box so they offset the entire driveline 2" to the passenger side. You might had to cut and reweld your stock mount on center and the maybe redrill holes in your frame rail depending on engine setback.