Davy_Baby9

iTrader: (23)

Will this fuel pump work? I know everybody says to run the Walbro 255, but I was just browsing Summit and this was featured. Seems like its almost the same as the Walbro, except this one is cheaper.

BTW, my LS motor will be making around 450 HP.

http://store.summitracing.com/partde...5&autoview=sku

Pop N Wood

iTrader: (1)

At 43 gph that pump won't support that much HP

the numbers on this site tend to say you need bigger stuff than most people run, but they are saying 450 HP needs about twice as much flow as that pump will support

http://www.centuryperformance.com/fu...e-spg-140.html

LS1GMCTruck

iTrader: (2)

I see that pump comes with male fuel barbs...Can a high pressure system use clamp-on hose?

Davy_Baby9

iTrader: (23)

I wouldnt think you would have a problem. All the Walbro 255 universal kits I found have barbs to screw into each side.

Lason

iTrader: (1)

Yeah as long as you use high pressure fuel injection hose.

LS1GMCTruck

iTrader: (2)

I guess you could just swap out the male hose clamp push-on barbs to Aero-Quip male Push-Lok barbs(which never come off) or to male AN fittings & go from there.

Carshopinc.com

iTrader: (5)

I sell my walbro pump with the -6 conversion fittings, I don't like the idea of the rubber hose with clamps......
http://cgi.ebay.com/ebaymotors/Walbr...spagenameZWDVW