how to modify the shift lever on a 4l60e for a ford shifter
05-16-2008, 08:00 PM
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Nov 2007
Location: orlando, fl
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
how to modify the shift lever on a 4l60e for a ford shifter anyone have suggestions on how to use the stock shifter with the 4l60e tranny? i have a 94 mustang with a bolt on shifter cable. the 4l60e has a ball socket on the shift arm.
the tranny currently in the car had the ball cut off and welded a nut. i didnt like the outcome to much so what are you guys doing? i dont like cheese so whats a cleaner way in doing this?
the tranny currently in the car had the ball cut off and welded a nut. i didnt like the outcome to much so what are you guys doing? i dont like cheese so whats a cleaner way in doing this?
05-19-2008, 11:55 AM
#5
I was thinking grind the ball off my stock sn95 shifter, and grind the ball off the 4l60e arm, drill a hole in each. Then just a piece of metal between the 2 with slotted holes in each end for adjustment, with bolts/nuts to hold in place.
But it still needs to be able to pivot where the bolts go in, so maybe a bearing on teh backside or somethign IDK.
But it still needs to be able to pivot where the bolts go in, so maybe a bearing on teh backside or somethign IDK.
