durty

iTrader: (3)

im modifying my own 5.3 harness using alot of info on this site, but i cannot find one thing. im putting a lsx into a 93 mustang, going to be using a th350 tranny instead of a 4l60e, on the harness can i just remove all the wires and plugs?...is it that easy?...or do i need to do something else?...obviously i will have to have the PCM retuned so it wont throw any codes, i removed all the emissions, rear o2s, a/c wiring, only thing i kept is what is need to run the motor

LS1MCSS

iTrader: (18)

You can remove all the tranny wiring.

durty

iTrader: (3)

the VSS signal outta c100 to?...and everything tranny related in c1 and c2?

LS1MCSS

iTrader: (18)

You should keep the VSS wiring from the tranny to the pcm.

durty

iTrader: (3)

ok, but everything outta the two big connectors(blue/red) can come out?...

LS1MCSS

iTrader: (18)

The VSS wires from the transmission to the pcm connectors need to stay. You can remove the rest of the tranny wiring from the pcm connectors.