AMS69

i cannot find any info on a 67 chevyII lsx swap. i would like to know about oil pan mods,headers etc. my conversion will not be fuel injected so it should be a bit simpler as well. thanks

babydeuce

iTrader: (24)

There are several threads on here about C2 swaps. Are you doing a stock clip, or aftermarket?

Jack

rockytopper

see if any of these guys can help
https://ls1tech.com/forums/showthrea...light=ii+chevy

https://ls1tech.com/forums/showthrea...1&highlight=67

https://ls1tech.com/forums/showthrea...4&highlight=67

https://ls1tech.com/forums/showthrea...light=chevy+ii

https://ls1tech.com/forums/showthrea...light=chevy+ii

lsxlowtech

iTrader: (32)

Look at my thread, stock front end f-body and vette pans both fit.I will sell the front end and save you lots of time.Ask me any questions i will try to help in any way.

AMS69

stock front

babydeuce

iTrader: (24)

Dont be so quick to say that the F-body/vette pans will work. If his frontend is truely stock then they will not. In order to run those pans, you must be using a front mounted rack setup, which you are. If the he still has the centerlink/tierod setup, he needs the GTO front sump pan.

OP: Comercial headers are not available for the stock clip to my knowledge. I did tons of research, and could not come up with a difinitive answer. I built my headers.

Jack

ssduane

iTrader: (3)

Here's my link, https://ls1tech.com/forums/showthrea...highlight=nova

Can also try http://www.stevesnovasite.com/forums...ad.php?t=58071

BLWN1

iTrader: (6)

details on said nova and when will it be for sale?

BBPanel

iTrader: (4)

I have a GTO pan for the stock clip - decided to go aftermarket front clip so its available. -Bob