5.3ls with an Ls2 intake manifold
09-10-2015, 05:56 PM
#1
Teching In
Thread Starter
Join Date: Sep 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
5.3ls with an Ls2 intake manifold whats up guys, new on here and new to the ls game and in need of some help from the ls gurus.
im currently swapping an avalanche 2004 5.3 ls into a 240sx. i recently acquired a complete ls2 intake mani with fuel rails, throttle body, and injectors. What harness would i need to run, and do i need the gto pedal because its DBW? any help greatly appreciated, or if theres a thread about this already, the link would help!
im currently swapping an avalanche 2004 5.3 ls into a 240sx. i recently acquired a complete ls2 intake mani with fuel rails, throttle body, and injectors. What harness would i need to run, and do i need the gto pedal because its DBW? any help greatly appreciated, or if theres a thread about this already, the link would help!
09-10-2015, 06:23 PM
#2
I used a LS2 intake on a 6.0 - Used an adapter to run a cable throttle body. I used a modified truck harness with the injector plugs swapped out to work with the LS2 injectors.