looking for a few vert specific items, please help
11-01-2011, 07:03 PM
#1
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Youngstown, Ohio
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
looking for a few vert specific items, please help Well, there are a few convertible specific things I need help finding.
#1 Roll bar. Bolt in 4 point finished in black. Like pictured below.
#2 manta stripe. I want to order it from 3rdgendecals but I don't see a vert option.
I know there were a couple more but I can't think of what they were. Thanks in advanced for all your help.
#1 Roll bar. Bolt in 4 point finished in black. Like pictured below.
#2 manta stripe. I want to order it from 3rdgendecals but I don't see a vert option.
I know there were a couple more but I can't think of what they were. Thanks in advanced for all your help.
11-01-2011, 08:27 PM
#2
On The Tree
Bolt in roll bar look to Wolfe Racecraft.
http://www.wolferacecraft.com/detail.aspx?ID=240
You can get it powdercoated finished like that one pictured too. As for the manta stripe.... I would think you could use manta option on both coupe/t-top/vert. If I am wrong I hope someone will chime in and help so I can be informed if I am incorrect. If you think of more questions I'll be around the boards and check the vert section often as I own a vert.
http://www.wolferacecraft.com/detail.aspx?ID=240
You can get it powdercoated finished like that one pictured too. As for the manta stripe.... I would think you could use manta option on both coupe/t-top/vert. If I am wrong I hope someone will chime in and help so I can be informed if I am incorrect. If you think of more questions I'll be around the boards and check the vert section often as I own a vert.
11-01-2011, 08:37 PM
#3
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Youngstown, Ohio
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
As far as I know the hood is the same but the trunk is different. But thanks for the link.
Last edited by 6spdscreaminchickin; 11-01-2011 at 09:04 PM.
11-05-2011, 11:43 PM
#6
On The Tree
Thread Starter
Join Date: Dec 2008
Location: Youngstown, Ohio
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Well I got ahold of the guy at 3gendecals and he does make a convertible kit so that's taken care of. and looking around everyone is happy with their wolfe roll bars so thanks guys for your help.
11-09-2011, 07:16 AM
#7
TECH Regular
The stripe should be the same for all trim options on the Camaro. The stripe itself does not go onto the roof on the t-top or hardtop, so all you will need is the hood and trunk part anyway, which should match up perfect.
