Convertible VehiclesEnthusiasts | Information | Maintenance
Welcome to LS1Tech.com!
Welcome to LS1Tech.com.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
I have a 1995 TA vert and I dont have any holes on the seats or head rests for our seat belt guides to go, don't we use the guides? Would make it look better. Any pics to show yours? thanks
Apparently the LT1 convertibles did NOT have the guides. The other models DID, including the T-top cars. Here are some pictures (which show this on each model). Clearly the 'vert was missing them. I pulled these pictures from my '96 brochure when I had my '96 Formula. By the way, my '01 'vert has the guide holes in the seat. I just broke one accidentally last month so I didn't even have to look. Very inexpensive and the dealer still had them in stock. Not sure what year they changed the convertibles to include the guides. I would guess '98 and up. Hope this info and the pictures helps (just click on them to enlarge a few times).
__________________ 2001 Trans Am Convertible - Bright Red w/ Taupe top 1987 Monte Carlo SS Aerocoupe - Burgundy 16,000 miles 2007 Ford Mustang GT/CS Convertible - White w/ Black top
Mine weren't broken, but I removed them because I didn't like the way they looked. Also swapped the headrests left to right so the residual indentations aren't as visible. It's a wee bit of a further reach to grab the belt, but it's not a DD anyway.
Out of 9 F-body's I've owned I can't recall one of them that had both guides intact, from 1970 to 2002. Count your blessings your car doesn't have them.
__________________ 2012 Mustang GT 6-spd Race Red and slow.