impalaSS

60ft----2.0644
330ft---5.7562
1/8ET---8.7448
1/8mph--83.64
1000ET--11.1267
1000mph-94.48


99 c-5
All i have done is 3.42's,programmed,zip tie mod and removed filter when I ran it. I ran an 8.83 bone stock and I thought after those mods I would be low 8's. Am I asking to much?

impalaSS

I can't believe after 45 views nobody can comment. Are there no drag racers?

ALL UC2

iTrader: (4)

is your car a m6? i have the same mods as you but i have borla stingers too.....i am going to the track tonight if it doesnt rain and i will let yu know

WKMCD

iTrader: (2)

I assume it's an A4 since M6's come stock with 3.42. What does the OP mean by "programmed".

ALL UC2

iTrader: (4)

well, had some issues tonight at the track......horrible spark knock and no power above 4200-4500 rpms, so i came home and checked out some stuff, and im getting two codes saying the cats are screwed, so i think thats some of it, gonna take them off and get some headers this week......but i also checked out the grounds on the frame thinking that could be some of the cutting out problem up top, and they are crusty as hell....gonna clean them all up tommorrow and get the cats off and a little tune up and give it another try next friday........best i could get out of the three runs i made was a 9.52.......and i launched at 5k....dead hooked. also ran a 9.95 spun off line and then a 10.52 letting off at half track cause of the problems i was having....



sorry i couldnt give you any better comparison to your car.....

impalaSS

Yes itS and a4. I feel like my 60foot is real bad

impalaSS

i also removed the cats