Service Active Handling After Cam Swap(2013 Grand Sport)
#1
Service Active Handling After Cam Swap(2013 Grand Sport)
I did a cam swap on a friends Grand Sport over the weekend and now there is a "service Active Handling" and "service traction control" on the DIC. Unfortunately, none of my code readers are able to pull the codes.
The steering wheel is straight and it drives fine down the road. No airbag light.
I think the rack/steering wheel is mis-aligned since we had to spin the rack to line up the steering shaft. I'm not sure how to proceed here since I can't remember which way we spun it and I don't want to go the wrong way and destroy the clockspring when I turn the wheel..
Are the C6's like the C5's where you can test the voltage on the steering wheel position sensor blue wire to find steering center?
Any help would be greatly appreciated.
Thanks,
-Tim
The steering wheel is straight and it drives fine down the road. No airbag light.
I think the rack/steering wheel is mis-aligned since we had to spin the rack to line up the steering shaft. I'm not sure how to proceed here since I can't remember which way we spun it and I don't want to go the wrong way and destroy the clockspring when I turn the wheel..
Are the C6's like the C5's where you can test the voltage on the steering wheel position sensor blue wire to find steering center?
Any help would be greatly appreciated.
Thanks,
-Tim