Emission & larger displacement/all-bore setups? - LS1TECH



Corvette Performance
C5 | Z06 | C6 | ZR1 | C7

Emission & larger displacement/all-bore setups?

Reply
 
Thread Tools Search this Thread
Old 12-25-2001, 10:31 PM   #1
Teching In
Thread Starter
 
Join Date: Dec 2001
Location: Hollister, CA
Posts: 25
Default Emission & larger displacement/all-bore setups?

I'm just starting some research for my next little project and would like to get some feedback from an emissions standpoint from any ls1 guys or gals out there in either CA or NJ that have gone the larger displacement/all-bore route.
Being in CA really stinks, but, visual inspection aside - what do some of these setups look like on the sniffer test.

FRPTech
FRPTech is offline   Reply With Quote
Old 12-25-2001, 11:37 PM   #2
Staging Lane
 
Join Date: Nov 2001
Location: HOUSTON
Posts: 77
Default Re: Emission & larger displacement/all-bore setups?

It all depends on the camshaft and cats! But if you want to get hypothetical... If you have two engine of diff size with the same cam, The larger should be cleaner. And if you increase displacement and cam size proportionally the two motors should have similar emissions. But this assumes that there are no tuning or injector changes.

Any thoughts, Tony?
<img src="graemlins/formula.gif" border="0" alt="[Pontiac]" />

[ December 25, 2001: Message edited by: nitropickup ]</p>
nitropickup is offline   Reply With Quote
Old 12-26-2001, 08:36 AM   #3
LS1Tech Co-Founder
iTrader: (38)
 
Nine Ball's Avatar
 
Join Date: Nov 2001
Location: Houston, TX
Posts: 32,995
Default Re: Emission & larger displacement/all-bore setups?

Chris is correct, passing emissions has mostly to do with the camshaft you select and how well your catalytics work. My all-bore 382ci motor passed emissions testing here in Houston with the MTI T1 camshaft (221/221 .558/.558 112) and still made 455 rwhp. It also idled like nearly stock. With the B1 cam (114 LSA) it would have passed even cleaner and sounded even smoother.

This was with FLP catalytics on my headers also.

Tony
Nine Ball is offline   Reply With Quote
Old 12-27-2001, 11:22 AM   #4
LS1Tech Co-Founder
iTrader: (34)
 
Pro Stock John's Avatar
 
Join Date: Nov 2001
Location: Chicago, IL
Posts: 41,992
Default Re: Emission & larger displacement/all-bore setups?

A looser set of aftermarket rings will cause the car to run a little dirtier too but the camshaft will really have most of the impact.
Pro Stock John is offline   Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Engine Specs needed deuce4935 Small Block & Big Block Chevy Specific 10 07-01-2010 10:11 AM
Opinions on 454 LSX Magnacharger build Mrbowtie26 Forced Induction 10 12-24-2008 08:49 AM
Can a 370 outperform a 383? SynergyV8 Generation III Internal Engine 173 12-23-2008 12:59 PM
Which size should i go with? LSs1Power Forced Induction 14 10-22-2008 10:00 AM
The first splayed valve LS gen 3 cylinder head Cary@Perf-Induction Generation III Internal Engine 30 11-30-2005 06:12 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 01:26 AM.


 
  • Ask a Question
    Get answers from community experts
What's your question?
Send