ls1CANTU

iTrader: (9)

I'm thinking of installing my ls6 stage 3 heads that i have but would like to know what size of cam you all c5 guy's are running.

zo6vetteman2003

iTrader: (1)

I'm running a 228/230 112lsa (COMP XR281HR) with some additional lift. I need to go back and get a final dyno tune, because the stock clutch couldn't hold past the torque peak. Got a new SPEC Stage 3+ so I'm ready. On the slipping clutch we saw 440rwhp at only 5000rpm, so it should be interesting. The cam is alittle lopey, but not rediculous at all. My heads are ported and polished LS6 and milled to 62cc just to give you an idea with that cam. The FAST 90 intake and 90mm TB is a must.

jbusmc1986

iTrader: (1)

TSP Magic Stick 4 238/242 590 ish lift at 111 lsa

huckzilla

Call the guys up at Texas Speed & Performance. Let them know what you're looking to get out of your car and they'll set you up with the right camshaft kit.

Huck

Sigforty

Futral Motorsports F14 in my Z06 here. It is a nice cam and makes alot of torque!!

sonicbaloo

iTrader: (2)

Give us a call. We can set you up with a call install.

Chad

ls1CANTU

iTrader: (9)

Thanks for the help every one. I'm looking in to a comp cam 232 230 595 591 lsa 113 on a 111 icl.

Z O SICK

iTrader: (1)

I'm runnning a Comp 228/323 .579 .579 @ 112 lsa nas it does pretty good. It's got some nice tq. I put down 414/385 with full exhaust on conservitive 91 octane tune. It's not the bigest cam but it's a very drivable cam and makes good power for it's size.