Disappointed With my results!!!!
#1
Launching!
Thread Starter
Join Date: Apr 2007
Location: Mt. Airy, Maryland
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Disappointed With my results!!!!
hey guys went to the track tonight. i threw the DR's on the back and i put bilsteins out back hoping to cut a good enough 60ft to get a 13 flat. my best tonight was a 13.652 @101. my 60ft was 2.049. in my sig when i ran a 13.4 @100 was on crappy street tires. maybe it was slightly because of the weather tonight why i did not see the results i was hoping for. it was about 85 degrees and muggy as crap. To make matters worse on my last run i messed up the rear. i have no more posi. it a single tire screamer now. it gives me an excuse to throw some 3.73's and a girdle at the 10 bolt lol. just thought i would share this with everyone. any input on this would be appreiciated. o by the way the 60ft on the run in my sig was a 2.1. also my launch was acctually better tonight then any other time. so idk what i can do about that. thanks in adavance for any good or bad comments.
#2
TECH Resident
You need better air to run better N/A. So its time to put the car down for some repairs/more mods. Id recommend a converter/tranny cooler and an EWP if you dont have one already.
#3
Launching!
Thread Starter
Join Date: Apr 2007
Location: Mt. Airy, Maryland
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
yeh i figured it was a little to do with the air. yeh i guess since the rear is messed up its time for gears, girdle, tranny cooler and thats it for now lol. by the end of the year hopefully some suspension and a stall which is becoming a must. even tonight with DR's i could only take the stock converter to bout 1300rpm before it would start to spin the tires over. well one of them anyway...
#4
yeh i figured it was a little to do with the air. yeh i guess since the rear is messed up its time for gears, girdle, tranny cooler and thats it for now lol. by the end of the year hopefully some suspension and a stall which is becoming a must. even tonight with DR's i could only take the stock converter to bout 1300rpm before it would start to spin the tires over. well one of them anyway...