ninetynineta

I have a 99 trans am full weight car with a4 and 3.23 gearing.... I am wondering what I can expect with mods I will be installing in the next couple of weeks. I have pacesetter long tubes, tsp true duals, fast 90/90, stock ported maf, blackwing lid, I will be installing 25% underdrive pulley a MS3 cam with prc double springs and comp 7.4 pushrods and Yank 3500 stall. I dont have heads at the moment and am wondering what I can expect to run with an elevation of about 3000 ft......???? Also my car has weld draglites with m/t et streets 275/60-15's

jay_99z

iTrader: (5)

I'd say 10's in the 1/4. 9's if you can get it to hook.

ninetynineta

Haha I wish....

I was thinking low 12's but I was awondering if anybody has a setup thats close and some #'s

00T/AWS6

iTrader: (17)

i'd say mid to low 11's, only thing holding you back is full weight. Some weight reduction and i think you could hit 10's.

ninetynineta

Dang those numbers are making me smile, but I dont see it with stock heads....... I sure hope so

MonmouthCtyLS7

iTrader: (6)

I have a buddy w/ a stalled 98 TA...3600 stall, bolt ons, 373's, stock intake and he cuts 12.30's...Id say high 11's are possible.

Villain281H

iTrader: (5)

please read the stickies