First time at the track
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: Lil Rhody
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
First time at the track
First time ever drag racing this car and I am pretty pleased with the results for the first time out with street tires. "Launching" @ 2500rpm and spinning 1 and half of 2nd with wheel hop. I was running on Goodyear all seasons at 30psi.
Do you think she has 12's in her if I can get my 60' down?
Best run of night:
DA 588
60' 2.080
1/8 8.777 @85.3
1/4 13.401 @108.07
(corrected with DA Calc 13.339 @ 108.538) I know this doesn't count
The rest of the night was pretty consistant 13.5s between 106.x-108.xmph with 2.2-2.3 60's spinning.
Do you think she has 12's in her if I can get my 60' down?
Best run of night:
DA 588
60' 2.080
1/8 8.777 @85.3
1/4 13.401 @108.07
(corrected with DA Calc 13.339 @ 108.538) I know this doesn't count
The rest of the night was pretty consistant 13.5s between 106.x-108.xmph with 2.2-2.3 60's spinning.
#5
Launching!
Thread Starter
iTrader: (1)
Join Date: Oct 2010
Location: Lil Rhody
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
I knew that traction was going to be an issue. My buddy wouldnt let me borrow his slicks so that is all I had. This was basically just to get a feel for how the car was going to act. It wil be while before I go again.
Here is my list of improvements to the car needed:
Subframe conectors
Cheater slicks (M&H or ET Streets)
Adjustable tq arm and relocation bracket
I was saving up for a cam but want to dial the car, get consistant times with traction before I do any power mods.
Here is my list of improvements to the car needed:
Subframe conectors
Cheater slicks (M&H or ET Streets)
Adjustable tq arm and relocation bracket
I was saving up for a cam but want to dial the car, get consistant times with traction before I do any power mods.
#7