Times about right for My mods??or not?

Thread Tools
 
Search this Thread
 
Old 06-11-2012, 11:10 AM
  #1  
Staging Lane
Thread Starter
iTrader: (3)
 
SmallBlock 383's Avatar
 
Join Date: Jan 2011
Location: North Augusta
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Default Times about right for My mods??or not?

I took my car to the track 2 weeks ago for the first time after my rebuild and Here's what it ran on a set of Mt drag radials on 17 inch Zr1 Old series wheels and stock z28s on front. Car weighted 3510 with me in it (150 lb driver)
1st run 2nd run
60ft:1.68 1.69
330:5.129 5.142
1/8:8.000 8.010
mph:85.81 86.06
1/4:12.62 12.624
mph:101.06 103.32

Here is my setup
Stock ls1 intake
Stock ls1 tb Hand ported
Stock MAF
Stock 5.3 (706) heads
1 3/4 longtube headers
TCI supposed to be 3500 stall but feels tight about 3000-3200
Stock 3.23 gears
Stock suspension
Custom comp cam 228/230 /114 lsa
Ram air mod (Dryer Hose Setup)
Aftermarket Lid
Stock exhaust including stock y pipe straight piped into dynomax superturbo-Did this just to get the car around for now

Had a bad o2 sensor this day to but was idling fine


What do you guys think.. i feel like it should be faster considering im on drag radials but the 60ft is a beast on 3.23 gears. My car is still shifting at 5800 too i had it mail order tuned by frost and i forgot to tell him to change the shift points.
IM trying to get into the 11's with this thing but i need some opinions on what i should do next.

Last edited by SmallBlock 383; 06-11-2012 at 11:20 AM.
Old 06-11-2012, 04:27 PM
  #2  
TECH Junkie
iTrader: (4)
 
s346k's Avatar
 
Join Date: May 2005
Location: johnson co.
Posts: 3,433
Likes: 0
Received 1 Like on 1 Post

Default

remove the stock truck heads & replace with most anything ls1 or better. put a quality 3" ory & catback on the car, replace that weakass stall for a 4k stall, get a dyno tune.

then post in the 11 second club thread with your 11.70 pass.



Quick Reply: Times about right for My mods??or not?



All times are GMT -5. The time now is 12:19 PM.