Make me faster... ideas?
07-16-2012, 09:50 PM
#1
11 Second Club
Thread Starter
iTrader: (20)
Join Date: Mar 2008
Location: Zimmerman, MN
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Make me faster... ideas? Im looking for that one thing that I have missed in my few years of racing. This is the best run I have made so far:
With SS3600 stall and MT ET Street radials 275 40 17 last year.
60' 1.720
330' 4.897
1/8 7.585
mph 91.16
1000' 9.914
1/4 11.869
mph 115.32
DA: 2605 (Estimate)
Over the winter I restalled the Yank to 4000 and got some MT ET Streets 26x11.5 on the Weld RTs Wheels.
60' 1.630
330' 4.815
1/8 7.545
mph 89.91
1000' 9.900
1/4 11.909
mph 112.62
DA: 2817 (Actual)
So I lost a little bit going from the 3600 and the DRs to the 4000 and ETs. Its been tuned and runs really well.
My modifications are:
Comp cam 234/236 at .598 and .545 lift with a 112 lsa
SLP lid/smooth Bellow
SSRA
Fast 90/90
36lb Fast injectors
1 3/4 long tube headers with dual cutouts after headers
FLT Level 4 4L60E
Yank SS4000
PST Driveshaft
MWC 9" with 3.89s Strange S-Trac/MWC short Tourqe arm.
Umi Subframe connectors/LCAs/PHB/Drag bar.
Rear Weld RTS 15x10 with MT ET Streets 26x11.5
Tuned by EFI Live
3650 lbs
My question is is there anything I can do to get me just a little bit faster, a tenth or two, anything that I have missed or overlooked?
With SS3600 stall and MT ET Street radials 275 40 17 last year.
60' 1.720
330' 4.897
1/8 7.585
mph 91.16
1000' 9.914
1/4 11.869
mph 115.32
DA: 2605 (Estimate)
Over the winter I restalled the Yank to 4000 and got some MT ET Streets 26x11.5 on the Weld RTs Wheels.
60' 1.630
330' 4.815
1/8 7.545
mph 89.91
1000' 9.900
1/4 11.909
mph 112.62
DA: 2817 (Actual)
So I lost a little bit going from the 3600 and the DRs to the 4000 and ETs. Its been tuned and runs really well.
My modifications are:
Comp cam 234/236 at .598 and .545 lift with a 112 lsa
SLP lid/smooth Bellow
SSRA
Fast 90/90
36lb Fast injectors
1 3/4 long tube headers with dual cutouts after headers
FLT Level 4 4L60E
Yank SS4000
PST Driveshaft
MWC 9" with 3.89s Strange S-Trac/MWC short Tourqe arm.
Umi Subframe connectors/LCAs/PHB/Drag bar.
Rear Weld RTS 15x10 with MT ET Streets 26x11.5
Tuned by EFI Live
3650 lbs
My question is is there anything I can do to get me just a little bit faster, a tenth or two, anything that I have missed or overlooked?
