Cam/Stall 1st Time Out
03-05-2016, 09:44 AM
#1
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
Cam/Stall 1st Time Out Got my car shipped from AZ monday had it at the track on Tuesday. Set up is small cam, 3000 stall, full exhaust and a lid. Still even has the stock ls1 intake. Anyway best et of the night was a 12.3@110 with a 1.85 60ft. I was happy with the car for the most part. It was my 1st time out with an auto car and traction was an issue. I tried foot braking the car to 2000rpm or so and it just blew the tires off. Its on nitto drag radials and I had them at 20psi. I really just wanted to see how it ran before I started modding but now im itching for 11's lol.
03-05-2016, 06:22 PM
#3
12 Second Club
Thread Starter
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
No clue, I dont even have the cam specs. Im the 3rd owner and the seller did not to the mods. Car is tuned well and runs as expected so im happy. I just wish I could have got my 60 down because I know theres more left in it.
03-05-2016, 09:07 PM
#6
get your nittos good and hot and down to around 14psi AFTER making a pass and don't preload the car instead mash it from idle so all the weight transfers to the rear and plants the tires and your 60 and et should improve
if its still having traction issues pull the front sway bar , if it still isn't hooking a floor jack and toolbox tossed in the trunkwell worked for me or similar ballast to get it to hook....
if its still having traction issues pull the front sway bar , if it still isn't hooking a floor jack and toolbox tossed in the trunkwell worked for me or similar ballast to get it to hook....