7.52@187 with gen3 5.7
05-27-2005, 11:56 PM
#1
TECH Junkie
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: Clayton, North Carolina
Posts: 3,898
Likes: 0
Received 6 Likes
on
6 Posts
7.52@187 with gen3 5.7 Ran the Casper car today. Converter is still to loose, but we are getting down the track on most(but not all) runs.
Went 7.54 @175 first pass letting off at about 1000feet. This run was the best 60ft at 1.11 and had the best 330 time also at 3.1x. The car wiggled pretty hard in 3rd so my driver wisely lifted.
Second run had softer 60ft at 1.13 and 330 was 3.2x but ran hard thru 3rd for 7.52@ 187.5 mph.
Third run was good launch to watch and driver thought it was best of day with higher boost on starting line than other run but the 60ft and 330 did not come up on ticket, then in top of second it shook the tires and he had to lift. This run was 7.61@ 121mph coasting.
Kurt
Went 7.54 @175 first pass letting off at about 1000feet. This run was the best 60ft at 1.11 and had the best 330 time also at 3.1x. The car wiggled pretty hard in 3rd so my driver wisely lifted.
Second run had softer 60ft at 1.13 and 330 was 3.2x but ran hard thru 3rd for 7.52@ 187.5 mph.
Third run was good launch to watch and driver thought it was best of day with higher boost on starting line than other run but the 60ft and 330 did not come up on ticket, then in top of second it shook the tires and he had to lift. This run was 7.61@ 121mph coasting.
Kurt
05-28-2005, 11:12 AM
#6
TECH Junkie
Thread Starter
iTrader: (3)
Join Date: May 2003
Location: Clayton, North Carolina
Posts: 3,898
Likes: 0
Received 6 Likes
on
6 Posts
AFR's are still on. Want to give the car all the right parts to get a true comparison for the switch.
Kurt
Kurt
Originally Posted by Caveman
That car is awsome!! Is that still with the AFR heads or did you put the Allpros on it?
LSX motors pull stout as hell N/A 
, Sprayed or Boosted!!! Nice #'s congrat's 
