SUX2BU

iTrader: (14)

stock cams make max torque around 4400. my converter is a 5100 stall. so i'm not at max tourqe leaving the line. it wasn't too bad with the 26's , i was 60'ing pretty decend no spin at all. then i went to bigger tires just to make it down the 1/4. so it was coming out of the hole VERY lazy.

11SECSS

iTrader: (199)

Have you thought about trying a 27" tire. By the way thats a nice time. My best SI before accident was 11.45 on a 1.50 60ft .Now putting a new SI car together for the 06 season. Going to try for the list again or atleast top 5.

SUX2BU

iTrader: (14)

Nah i'm not going to bother. i figure i won't be going back to the 1/4 mile track anytime soon so i'm just gonna throw the 26's back on and tune my shocks.
I figure if i try the 1/4 again i'll just keep the 26's and rev to 6600 in third gear. might not MPH as good but it will get the time.

Bryan @ Speed Inc.

iTrader: (19)

hmm... so bite the bullet and get a smaller converter, stick w/ the 26" tires and just run out the rpm's in the 1/4.

=)

BlueSix

Smaller tires might also make the converter stall a little lower. The more resistance you add the higher it will stall, the 26's might help a little with that.

WILWAXU

iTrader: (6)

Good deal man!

Congrats!

Should be fun in some good DA

SUX2BU

iTrader: (14)

**** that ****. i spent $900 on this coverter and i'll be damned if i buy another one to run a bit faster for a few months till i throw a cam in it. i race my car for fun and i'm only running the stock cam for gas milage until i move closer to my job next year. but thanx for the suggestion.

robz*

iTrader: (1)

Nice run! As a comparo, My buddy just ran 11.21 in a 'lightly modded' bolt on Zo6. He has intake,headers, and tires only in full factory weight.