What to expect? Head/Cam/Spray
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Etown, KY
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
What to expect? Head/Cam/Spray
I went to the track last year N/A and ran the 1/8th I haven't been able to get down to the 1/4th to make a pass yet but plan on it next week as I finally have some vacation time. My best pass previously was on Nitto's Drag Radials.
RT .0802
60ft 1.8581
330ft 5.1982
ET @594 7.4351
1/8th ET 7.9302
1/8thMPH 90.88
That was my best ET so far my best mph was an 8.09 @ 92.8 mph with 1.9 60ft.
Since that pass I have added some Mickey Thompson ET Street Radials with an NX Dual Nozzle Jet. I have it right now jetted for a 175 shot out of the hole. I figure I may have a problem with traction but it has been hooking good on the street recently on this amount of spray right out of the gate. What kind of times should I be looking for on spray 1/8th and 1/4th? At this power level I didn't know how much ET a 175 should drop off? With the tires I was expecting maybe a mid to low 1.7 60 fts.
RT .0802
60ft 1.8581
330ft 5.1982
ET @594 7.4351
1/8th ET 7.9302
1/8thMPH 90.88
That was my best ET so far my best mph was an 8.09 @ 92.8 mph with 1.9 60ft.
Since that pass I have added some Mickey Thompson ET Street Radials with an NX Dual Nozzle Jet. I have it right now jetted for a 175 shot out of the hole. I figure I may have a problem with traction but it has been hooking good on the street recently on this amount of spray right out of the gate. What kind of times should I be looking for on spray 1/8th and 1/4th? At this power level I didn't know how much ET a 175 should drop off? With the tires I was expecting maybe a mid to low 1.7 60 fts.
#3
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2005
Location: Etown, KY
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Coach 02 A3 Z/28
Low 7's in the 1/8th and low 11's in the 1/4. Good luck.
Coach
Coach