1.49 60FT 6spd W/ Facotry Bilstein/SLP Suspension
#1
1.49 60FT 6spd W/ Factory Bilstein/SLP Suspension
I know this is not a record breaking time, but think its kinda impresive with the factory ordered suspension. My 99 Camaro SS Heads/Cam and 150 shot pulled a 1.49 60ft. It still has the SLP Bilstein/Eibach springs and shocks. Not the QA1 that every runs at the track. I like the bilsteins when i drive them on the street. Other suspension mods are Spohn TQ Arm, LCA, PHR, Drag Sway Bar and !Front Sway Bar.
Info on the pass
60ft-1.499
330-4.424
1/8-6.861
mph-99.15
1000-8.963
1/4-10.704
mph-130.09
Race weight with me in the car is 3625. Its not a light weight.
Info on the pass
60ft-1.499
330-4.424
1/8-6.861
mph-99.15
1000-8.963
1/4-10.704
mph-130.09
Race weight with me in the car is 3625. Its not a light weight.
Last edited by Quick Time; 09-14-2006 at 09:59 AM.
#2
10 Second Club
iTrader: (6)
Join Date: Jan 2006
Location: Hattiesburg, MS
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
What tires, kind and size? How hard did you leave? What did you dyno horsepower and torque? What kind of clutch do you have? What kind of heads and cam do you have? Can you post pics?
Nice times man!
Nice times man!
#4
10 Second Club
iTrader: (6)
Join Date: Jan 2006
Location: Hattiesburg, MS
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
It's a similar setup to mine except I have a spec 3+ clutch and some 26" et streets. I have no idea as to what my car would dyno on the 150 shot but I would guess it would be somewhere close to that. Also my car doesn't weigh near that much with me in it( I only weigh 130).
#7
TECH Veteran
iTrader: (10)
yea, stock stuff isnt all that bad, i managed consistant 1.49's with stock springs and shocks, stock sway bar on 28x10.5's at about 3250lbs putting about 440 to the ground, that was the best i could manage till the stock sway bar started twisting up pretty bad and leaving crooked