Formula_Power

iTrader: (18)

I am in the process of a 12 bolt install (Along with other things) and I decided to do my rear suspension as well...almost 500 HP with a completely stock rear end and suspension was killing my times. anyways here is what I have so far

1. double adjustable QA1 rear shocks
2. BMR Heavy duty double adjustable LCAs
3. BMR adjustable short style Torque Arm with tunnel mount
4. BMR non-adjustable panhard rod
5. BMR Extreme Anti-roll sway bar

Anything else I need for the rear?

Also what about the front? I am completely stock up there

WhiteLTone

iTrader: (18)

only thing i would recommend is maybe LCA reloc. brackets.

ndfrsd6

iTrader: (5)

front at least QA1 12 way adjustable ...

C_Rules

iTrader: (7)

for the front go with some coil overs, strange or afco.

99bowtieZ

Just pull some weight out of the front for better weight transfer Then lets see the light under those front wheels!

Trans Am Jam

iTrader: (7)

k member

Trans Am Jam

iTrader: (7)

or if you really want . GO TUBULAR EVERYTHING. supposedly it makes a difference from stamped metal. control arms, reloc. brackets. polyurethane bushings. lol change the boot for the rack-and-pinion . lololol

BlackWS666

iTrader: (31)

Aerospace brakes, LPW ultimate 12 cover for the rear. The front is a whole new ballgame, start saving, and looking in the classifieds for lower a-arms, k-member, and QA1 shocks.

For future reference tubular upper a-arms are almost completely worthless, and save 1 pound on both sides. Spend the money elsewhere....