Remote mounted waterpump
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: Lafayette, LA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Remote mounted waterpump
I am interested in using a remotely mounted pump and some fitting blocks but I haven't had any luck finding them or any info on how man GPMS the pump has to put out. Where can I get a radiator that has just and inlet and outlet, I want to do a filler neck in the hose and just get rid of the stock radiator with all its ports and hoses.
#6
TECH Resident
iTrader: (17)
The pump Im running is a remote mount pump. Its actually a radiator mount - Call Madman he can get you set up with a custom Afco Radiator. Mine has 2 x -12AN ports for the inlets (and a 1/4" NPT Bung for the steam vents) and the meziere pump has an adapter that needs to be welded on for the outlet.
#7
9 Second Club
iTrader: (31)
I have a CSR remote mounted pump. We have ours mounted on a plate onto the front of the frame rail on the driver's side.
I bought the generic Griffin Radiator that all the FI guys use from Summit, then called and sent it to Griffin to have new end-tanks welded on with -an fittings welded onto it where i wanted them. I think the whole radiator setup cost me about $300, and the CSR pump was less than $200 off Ebay, haha.
I bought the generic Griffin Radiator that all the FI guys use from Summit, then called and sent it to Griffin to have new end-tanks welded on with -an fittings welded onto it where i wanted them. I think the whole radiator setup cost me about $300, and the CSR pump was less than $200 off Ebay, haha.