How fast did you take your FACTORY Torque Arm?
02-15-2010, 12:37 AM
#1
On The Tree
Thread Starter
iTrader: (15)
Join Date: Aug 2007
Location: Houston, Texas
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
How fast did you take your FACTORY Torque Arm? Just outta curiosity i just wanted to see how fast some people went with their Factory Torque Arm time and 60ft and if you know your weight. my car was full weight with an iron block and it went 10.29 with a 1.39 60 at full weight i know this is prolly a stupid idea to go that fast with it but it worked it didnt break so. just wanted to see what the fastest time ever was on one of these were
02-15-2010, 08:55 PM
#6
12 Second Club
Join Date: Jul 2005
Location: Lexington, Kentucky
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
I know of a guy whos been 4.90's with one.. Its in a third generation car though, so I dont know how much different they are from the fourth generation cars. I know a friend of mine tore up a factory torque arm with a bolton LS1 car.. *shrug*
Trending Topics
02-16-2010, 01:57 PM
#10
TECH Fanatic
iTrader: (9)
Join Date: Apr 2008
Location: Tampa,Florida
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
Had a customer running 9.90's with one but started to develop problems 30-40' out the torque arm would bend then spring back and unload the car 
Any questions just ask
Any questions just ask
02-16-2010, 03:06 PM
#11
5.56@125 with a 1.29 60ft
Took the TA off and welded a 1in pipe down the length of it and welded the front bracket up so it couldn't split apart and added a bar that went to crossmember to help not brake the tail housing. It was a stock ta though.
Took the TA off and welded a 1in pipe down the length of it and welded the front bracket up so it couldn't split apart and added a bar that went to crossmember to help not brake the tail housing. It was a stock ta though.
02-21-2010, 11:47 AM
#20
I got to see a video of this. That is straight flyin for a stock arm. 8's on a stock arm is nuts.
