1st time at the track
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
1st time at the track
well guys , went to the track last night, and was a little dissapointed at my et.. but i didnt have time to practice more since mustangs were breakin left and right... here's my timeslip
60' 2.0
330 5.621
1/8 8.6
mph 78.26
1000' 11.309
1/4 13.579
mph 99.14
my shift pts are way too low for my motor, thats why i THINK mt MPH is so low
mods are LE1 H/C 226/230 111 lsa, LT's w/ true duals, 3600 Circle D stall, built 4l60e , SFC, stock 323s, stock suspension, Forged bottom end , mail order tune..
shifts points on the stock tach are 6000 RPM, but my tach is off by around 200 rpm, so its actually 5800-5900 shift pts...
any comments or suggestions are welcome
60' 2.0
330 5.621
1/8 8.6
mph 78.26
1000' 11.309
1/4 13.579
mph 99.14
my shift pts are way too low for my motor, thats why i THINK mt MPH is so low
mods are LE1 H/C 226/230 111 lsa, LT's w/ true duals, 3600 Circle D stall, built 4l60e , SFC, stock 323s, stock suspension, Forged bottom end , mail order tune..
shifts points on the stock tach are 6000 RPM, but my tach is off by around 200 rpm, so its actually 5800-5900 shift pts...
any comments or suggestions are welcome
#3
12 Second Club
iTrader: (4)
Join Date: Dec 2007
Location: Between Bowling Green/Owensboro
Posts: 1,714
Likes: 0
Received 0 Likes
on
0 Posts
http://www.dragtimes.com/da-density-...calculator.php
Check your DA. Something isnt right or the DA is horrible.
Check your DA. Something isnt right or the DA is horrible.
#6
TECH Enthusiast
Join Date: Apr 2008
Location: Dickinson, Tx
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts