| | hex vs splined quick release wheel
fabbing up the entire steering system and was woundering if anybody is using the hex style quick release steering hub. Only thing i can think is it might have more play in it vs a splined hub. Kinda like a poorly fitting socket on a bolt head.
Hex hubs are a good bit cheaper then splined so i figured id ask.
I was also woundering if people were using an actual flange seal where the coloumn goes through the firewall or just drilling and welding a plate to the coloumn.
2000 T/A 364 lq4,afr 205's, 224/228 114, victor jr, 4l80e ect. 93 dodge cummins 1 ton 5speed