Went to track with new Patriot 6.0 Liter 59CC Heads
#1
TECH Enthusiast
Thread Starter
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Went to track with new Patriot 6.0 Liter 59CC Heads
Went to the 1/8 mile track in Denton, TX today around 4 pm. I think it was 58 degrees or so. My Dyno was only 380 rwhp & 400 tq.but that is through a 4000 stall.
This is the 1st time I went to the track with the new Patriot Heads, Bigger Cam, Kooks Headers, and the New Yank SS4000.
My 2nd Run I ran:
7.26 at 97.51 MPH with a 1.70 60' I ran many 97.50 MPH runs which surprised me.
My Best Run of the Day:
Reaction .5440
60 FT 1.613
330 FT 4.600
1/8 ET 7.152
MPH 95.91
I am pretty Happy with that
I am thinking I am going to be in the 11.2 range at 120-121 MPH
The Bandit.............
This is the 1st time I went to the track with the new Patriot Heads, Bigger Cam, Kooks Headers, and the New Yank SS4000.
My 2nd Run I ran:
7.26 at 97.51 MPH with a 1.70 60' I ran many 97.50 MPH runs which surprised me.
My Best Run of the Day:
Reaction .5440
60 FT 1.613
330 FT 4.600
1/8 ET 7.152
MPH 95.91
I am pretty Happy with that
I am thinking I am going to be in the 11.2 range at 120-121 MPH
The Bandit.............
#3
TECH Enthusiast
Thread Starter
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I was happy with those times. My car was always pretty quick for what it had on it, I must have got a good one from GM. When I was almost stock with an air lid, exhaust, and programming on stock crappy EMT's I ran a 12.57 at 111 MPH.
I really don't know what my car weighs. I am about 190 plus the weight of a vette which is 3,220, so I would guess about 3,400 LBS I wish I knew what each mod added to my times but I got it all at once.
Just FYI, With my old 224 Cam Only, a Yank SS3600 TC, and No LT Headers I ran 11.82 at 115.19 MPH with a 1.65 60' and I think my 1/8 mile on that run was a 7.53 at 90.50 MPH
I really don't know what my car weighs. I am about 190 plus the weight of a vette which is 3,220, so I would guess about 3,400 LBS I wish I knew what each mod added to my times but I got it all at once.
Just FYI, With my old 224 Cam Only, a Yank SS3600 TC, and No LT Headers I ran 11.82 at 115.19 MPH with a 1.65 60' and I think my 1/8 mile on that run was a 7.53 at 90.50 MPH
Trending Topics
#10
TECH Enthusiast
Thread Starter
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Well, I wish it was an MN6 sometimes too, but the A4 is great at the track.
My Cam only, SS3600 times, pre long tube headers, were 1.65 and again my best run at that time was an 11.82 at 115.19 MPH with a 1.65 60'.
Then I added a 228 Cam, upgraded to an SS4000, got Long Tube Headers, then I ran this 1/8 mile times that I just posted. I was on 18" BFG DR's.
It is a Blast to drive now. You F-Body guys all seem to have really fast cars. You seem to soup them up more than the Vette Crowd does, but there are some fast Vette's Too.
Now If I get Nitrous I will be in the 10's, b ut I am a whimp and the car is running to good to mess it up.
Thanks Guys
The Bandit
My Cam only, SS3600 times, pre long tube headers, were 1.65 and again my best run at that time was an 11.82 at 115.19 MPH with a 1.65 60'.
Then I added a 228 Cam, upgraded to an SS4000, got Long Tube Headers, then I ran this 1/8 mile times that I just posted. I was on 18" BFG DR's.
It is a Blast to drive now. You F-Body guys all seem to have really fast cars. You seem to soup them up more than the Vette Crowd does, but there are some fast Vette's Too.
Now If I get Nitrous I will be in the 10's, b ut I am a whimp and the car is running to good to mess it up.
Thanks Guys
The Bandit