95 pimpala ss build thread. phase 1 complete
#1
95 pimpala ss build thread. phase 1 complete
i wanted to make this thread to give some insight on how a bbody gets tubbed im putting a chris alston back half which was going to be put on my brothers grand national but he ended up giving it to me. the tires are 29x18.5x15 mickey sportman pros and 15x15 draglites.
im installing a pro street eliminator(i think thats the name) 4 link kit from cachassisworks.com
moser m9 rear end (when i get the cash to order it ahahahaha)
sw race cars 10 point chromoly roll cage.
do all the back half tin work.
started today by cutting off the stock wheel tubbs and the rear part of the frame ALL THE CUTS ARE NOT FINAL WE RATHER CUT NOT ENOUGH THAN TOO MUCH.
btw me and a friend are doing this whole project by our selfs and with a little guide of my engine builder.
any questions please ask!!!
im installing a pro street eliminator(i think thats the name) 4 link kit from cachassisworks.com
moser m9 rear end (when i get the cash to order it ahahahaha)
sw race cars 10 point chromoly roll cage.
do all the back half tin work.
started today by cutting off the stock wheel tubbs and the rear part of the frame ALL THE CUTS ARE NOT FINAL WE RATHER CUT NOT ENOUGH THAN TOO MUCH.
btw me and a friend are doing this whole project by our selfs and with a little guide of my engine builder.
any questions please ask!!!
Last edited by 383lt1impala; 07-31-2010 at 04:01 PM.