DMH Fabrication

iTrader: (126)

Few people have asked, so here are the carbon ones we are selling and making in house. We were selling them for 45 shipped although if a few people wanted to put in orders as a group we could probably discount them. We don't drill the screw holes so that you can put them wherever suits your car best. This is a 5" straight ring rough cut before we went back and sanded the inside perfect. We sell 3", 3.5", 4", and 4.5" both straight and angled. Shoot me a PM if interested.

Dustin

robsquikz28

iTrader: (246)

very cool

Fast_94_Z

iTrader: (12)

would work great for the bumper aswell. thats where i had my old exhaust exit

DMH Fabrication

iTrader: (126)

Exactly how my personal car is. They changed rules w no exh exit rule so we run ours right out the side of the bumper now.

Before we put the carbon ring on:

Fast_94_Z

iTrader: (12)

yep exactly how my old setup was see told ya it was a good idea lol. ever consider finishing up the true flames in the nose of the bumper? just curious

DMH Fabrication

iTrader: (126)

Thought about it however the bumper gets torn up putting the car on and off trailer etc. Front sits lower that now. So don't really want to paint it anything but black so it's easy to respray from time to time.

Fast_94_Z

iTrader: (12)

get some long ramps made....the solstice gxp coupe we road race around sits lower then the t/a. grant it theres no torque arm or anything but we manage to get it out. put a piece of wood to roll over betweenthe ramp and trailer and then we have like 8ft long makeshift wood ramps that step down that we put under the door and wheel it out that way.

man its been awhile since ive been on here. you guys werent even avendor yet.

DMH Fabrication

iTrader: (126)

Yeah, i'm sure we could fab up some ramps. Just been busy and have not really worried about it. Blew a charge pipe off earlier this year and cracked the paint on the bumper so it needs to be resprayed again anyways when I get time.

Fast_94_Z

iTrader: (12)

thenyou have theperfect oppurtunity to do it ramps make a big deal. my car sits a little lower then yours.....when the coilovers were only lowered an inch i still had to jack up the trailer to get the car out. then again my ride heights built in for the most part.....what can you do for me on carbon fiber t tops. shoot me a pm if you can..do you have mroe pics of them? thanks!!!!

DMH Fabrication

iTrader: (126)

T tops are in the process of being redesigned since GM does not offer one of the parts I needed with the old design. Keep a check here and there will be a thread when they are done.

Dustin