223HAWK

iTrader: (11)

Im thinking of doing a 125 or 150 hit on my Hawk. Lookin to get a little faster. Any thoughts suggestions with my current setup of MS4 Cam, 6 speed and 4:56s?? Worried that the 4:56s might be too much gear even with a 28in tire.

Zmg00camaross

iTrader: (11)

Buy a good kit with the window switch and all the safety stuff, and rev it to 72 to 7300 rpm you mite make it.

JRracing

iTrader: (35)

It will not make it with a 4.56. I had a 28" tire and 4.10 and was running out of gear. On a 150 shot.

99mongooSS

iTrader: (4)

just change the gears go with 3.73's and spin it high. like 7300.

Zmg00camaross

iTrader: (11)

What was your raceweight? If you dont mind.

xfactor_pitbulls

iTrader: (16)

4.10 gear with 28" tire. That will get to you to around 140mph at 7000 rpm.

HSESWS6

iTrader: (3)

I did a 150HP shot with 4.56's and 28x10.5's. The best I could get was 10.007@137.29 1.32 60' but I had to spin it to 7500 rpm and was out of the powerband and 1-3 are so short they are not doing much. Switched to a 3.89 gear and went 9.78.

SS4Luck

iTrader: (10)

(sorry to hijack for a second)

would the ms4 456 and spray combo be okay for street racing?


ive been debating the same thing cuz im thinking about putting a 150-175 on mine for the streets to run with the cobras/blown vettes/hi boost evos and ****. we do mainly 50/60-130ish pulls

xfactor_pitbulls

iTrader: (16)

Depends on your tire. If you are running a 28" I would use a 3.90-4.10 gear. If you use a 26" I would be more like 3.73. With the torque you are going to hit with spray, especially for roll racing, you need to back the gear down.

223HAWK

iTrader: (11)

Same...thats all I really planed to use it for..At the track run high 11s adn then beat the hell out of guys on the street and let them scratch their heads

SS4Luck

iTrader: (10)

im actually going to be running a 29" tire (305/45/18, its 28.89 from m/t)

mike c.

iTrader: (1)

Nawzz? did you watch that GAY show about the rice cars that was out some years ago with vin who ever he was?? Well,at least you drive a real car and not a rice car.

WKMCD

iTrader: (2)

I'm really glad someone else said that...

223HAWK

iTrader: (11)

Tooo bad using the word.."Nawwzzz" was supposed to be a joke...

02SOMWS6

iTrader: (6)

not sure what gear you have now but 4.33 gears should work fine. 4.56 gears will have to be reved to about 7500-7550 to make it with out over reving

223HAWK

iTrader: (11)

Im afraid I cant take mine to 74+...just seems a little high to me. I need to pull the engine and check the rod bolts and probaly change them.

ls2 bait

iTrader: (11)

i had to step it back to 3.73 as i was going through at 7300 and way out of my powerband w a 4.10. but its going to depend a lot on raceweight, how well you can drive, suspension set up, how much power the car makes etc etc.