1st 11sec pass in my FRC C5
#1
1st 11sec pass in my FRC C5
Norris motorsports just completed some new mods on my 99 FRC C5 and I went to Orlando Speed world last night and got my 1ST 11 Sec pass in the car.
run 1 & 2 were learning passes trying to determine where to shift. Those passes were 12.05 @ 117.7X w/ 1.86 60 & 12.06 @ 118.3X w/ a 1.96 60.
Pass 3 1.82 60 and everything was going great until I missed 4th gear and ran 11.92 @ 111.7X. On the next pass I spun w/ a 1.97 60 ran 11.97 @ 118.8X. Next week I get more new stuff and I will shoot for the 11.5's on dr's w/ stock heads. I'm very happy w/ the times so far and can't wait for the new parts.
Next round of parts: 3.90 gears, Ported TB, air bridge & new TPIS headers w/ offroad pipe. Current setup = sig below + 226/230 xe cam, asp pulley, LS6 intake , spec III clutch and nitto 305 dr's.
run 1 & 2 were learning passes trying to determine where to shift. Those passes were 12.05 @ 117.7X w/ 1.86 60 & 12.06 @ 118.3X w/ a 1.96 60.
Pass 3 1.82 60 and everything was going great until I missed 4th gear and ran 11.92 @ 111.7X. On the next pass I spun w/ a 1.97 60 ran 11.97 @ 118.8X. Next week I get more new stuff and I will shoot for the 11.5's on dr's w/ stock heads. I'm very happy w/ the times so far and can't wait for the new parts.
Next round of parts: 3.90 gears, Ported TB, air bridge & new TPIS headers w/ offroad pipe. Current setup = sig below + 226/230 xe cam, asp pulley, LS6 intake , spec III clutch and nitto 305 dr's.
Last edited by jason99frc; 03-04-2004 at 02:43 PM. Reason: inofrmation missing
#4
Vince,
Thank you.
BTW I coming after your big 6-7" 300LB goofy As*. (people don't worry we are friends)
Vette crazy,
I run Nitto 305/35/18 Drag Radials as my everyday tire and track tire. The RWHP #'s are with the cam. I have a damaged set of the original TPIS / RK sport headers and x-pipe w/ cats on the car which are costing me ~ 10-20 RWHP. We are changing them out as soon as Norris can get me a new X-pipe. Once I get the other mods done and the 3.90 gears w/ the hardened output shaft I will make some passes on ET Streets and go for some low 11's.
I don't know if you guys saw my other post about the fastest C5 M6 non Z06 cam only post but, What is the fastest cam only C5 M6 Non Z06 you know of? I want that time, so help me figure out where I need to be.
Jason
Thank you.
BTW I coming after your big 6-7" 300LB goofy As*. (people don't worry we are friends)
Vette crazy,
I run Nitto 305/35/18 Drag Radials as my everyday tire and track tire. The RWHP #'s are with the cam. I have a damaged set of the original TPIS / RK sport headers and x-pipe w/ cats on the car which are costing me ~ 10-20 RWHP. We are changing them out as soon as Norris can get me a new X-pipe. Once I get the other mods done and the 3.90 gears w/ the hardened output shaft I will make some passes on ET Streets and go for some low 11's.
I don't know if you guys saw my other post about the fastest C5 M6 non Z06 cam only post but, What is the fastest cam only C5 M6 Non Z06 you know of? I want that time, so help me figure out where I need to be.
Jason