nastyiroc

iTrader: (9)

CAN HEAT BE RETAINED WITH USE OF THIS PLATE?

http://www.bmrsuspension.com/index.c...&productid=247

96LT1355Z28

iTrader: (2)

Yes but you will have to modify that pannel. It will have to bolt to the engine bay side and you will have to cut out the holes for the heater hoses. There's a few theads out there with pics on how people have retained heat while deleting the AC.

1nastyss

iTrader: (12)

I'm running the same plate and did like he said, bolted it up from the engine bay side, cut the 2 holes out for the hoses, don't forget to drill the smaller hole for the vacuum hose to use the controls

Orange99Z

iTrader: (25)

https://ls1tech.com/forums/drag-raci...-c-delete.html

https://ls1tech.com/forums/drag-raci...till-keep.html

99french

iTrader: (7)

Yes u can with that bmr plate. Drill it out for hoses. I used the summit heater. Wired it into my stock fan control too.

studderin

iTrader: (28)

I made a lighter heater with the stock parts. simple, no duct or big parts, cheap, everything you already have.

info in my build thread