Heads, cam, and bolt-ons results
05-17-2004, 01:33 AM
#1
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Charlotte, MI
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Heads, cam, and bolt-ons results 11.43 @ 119.28 in the 1/4
best/worst 60 1.589/1.632
best/worst 1/8 7.295/7.347
best/worst 1/8 mph 94.65/94.27
best/worst 1/4 11.437/11.489
best/worst 1/4 mph 118.78/121.21
weather was 60° 30.25 baro 70% humidity
couldn't get the car to dead hook on any of the runs. Spun leaving for about 8-12 feet. I don't know whether it was the track conditions or the 2 year old ET streets.
With a dead hook in simular weather I'd expect 1.500 sixtys and 11.20s at 120 mph.
best/worst 60 1.589/1.632
best/worst 1/8 7.295/7.347
best/worst 1/8 mph 94.65/94.27
best/worst 1/4 11.437/11.489
best/worst 1/4 mph 118.78/121.21
weather was 60° 30.25 baro 70% humidity
couldn't get the car to dead hook on any of the runs. Spun leaving for about 8-12 feet. I don't know whether it was the track conditions or the 2 year old ET streets.
With a dead hook in simular weather I'd expect 1.500 sixtys and 11.20s at 120 mph.
05-18-2004, 09:43 PM
#6
9 Second Club
iTrader: (11)
Join Date: Nov 2001
Location: Back home in Texas!!! (DFW)
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Nice results...will see you out at Stanton sometime this year, Big Al...you might even see me with my lil' red/red M6 GTO before the Formula gets off jackstands. Take care. Dave
PS: You can pitch in and help me get the GTO up on the trailer when I pooch the rear and/or prop shaft and/or half-shafts out of it...it looks like it won't take much to shatter it on ET Streets!
PS: You can pitch in and help me get the GTO up on the trailer when I pooch the rear and/or prop shaft and/or half-shafts out of it...it looks like it won't take much to shatter it on ET Streets!
05-19-2004, 12:21 AM
#7
11 Second Club
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Charlotte, MI
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RUQWIKR
Nice results...will see you out at Stanton sometime this year, Big Al...you might even see me with my lil' red/red M6 GTO before the Formula gets off jackstands. Take care. Dave
PS: You can pitch in and help me get the GTO up on the trailer when I pooch the rear and/or prop shaft and/or half-shafts out of it...it looks like it won't take much to shatter it on ET Streets!
PS: You can pitch in and help me get the GTO up on the trailer when I pooch the rear and/or prop shaft and/or half-shafts out of it...it looks like it won't take much to shatter it on ET Streets!
What's up with the Formy?
If I'm there I can help, I carry a heavy duty com-a-long in the trailer toolbox.
Trending Topics
05-19-2004, 04:40 PM
#8
9 Second Club
iTrader: (11)
Join Date: Nov 2001
Location: Back home in Texas!!! (DFW)
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AL SS590 M6
thanks Dave, I'm sure that we'll both be there at the same time at least once this year.
What's up with the Formy?
If I'm there I can help, I carry a heavy duty com-a-long in the trailer toolbox.
What's up with the Formy?
If I'm there I can help, I carry a heavy duty com-a-long in the trailer toolbox.
I have a bone stock 2,000 mile motor that may end up in the car for a few weeks to try to get a 10.99 stock internals run before the motor becomes my buddy's for converting his LT1 NHRA/IHRA stocker over to an LS1...or, if that doesn't happen, just bring out the Formula this fall for a bit. I doubt if I'll be out in the Formula before the fall as I'm enjoying driving the snot out of the GTO with my two sons...bone stock drivetrain right now.
Take care to all and keep the good runs going. Dave
