1nastyss

iTrader: (12)

My engine setup is in my sig below , but I currently have Kooks 1 7/8 stepped headers with 3.5 collectors with about 3 feet of 3.5 pipe coming straight off the collectors and dumped through 2 3.5 dynamax ultraflow mufflers, once I put my new rear and torque arm in , I'm having clearance issues between the DS muffler and TA now so I'm looking at new mufflers , thing is , I'm having problems finding anything narrow enough in a 3.5 size that'll work but there are tons in 3 inch . My main question is , will I be ok leaving the 3.5 pipe and just reducing it down to 3 inch mufflers, or will it hurt my power and torque ? Any suggestions ? Thanks fellas

RENE'S RAGE

iTrader: (96)

Do you need the 3' of pipe off the collectors?
I have around 9" off my collectors, then 3.5" oval Borla XR-1's.

1nastyss

iTrader: (12)

No , I already have pipe off the collectors , around 3 feet of 3.5 pipe

RENE'S RAGE

iTrader: (96)

Can you shorten the pipe?
Why do you need 3' of pipe?

1nastyss

iTrader: (12)

Really don't I guess , they go back and dump as far back as a regular x pipe setup