1000+ street/strip 98 ss project car
#162
TECH Fanatic
Thread Starter
#167
TECH Fanatic
Thread Starter
Tore my car all the way apart. Sold the trans, sold the motor, rear axle, convertor, intercooler, driveshaft. Pretty much starting over.
First I found a sweet deal on a darton sleeved ls1 block that I was going to buy a set of trick flow heads for. They I decided for any odd reason if I broke the motor and the heads were damaged I would be pretty sad.
First I found a sweet deal on a darton sleeved ls1 block that I was going to buy a set of trick flow heads for. They I decided for any odd reason if I broke the motor and the heads were damaged I would be pretty sad.
#168
TECH Fanatic
Thread Starter
So I decided if I am going to drop that much money on a stock ish motor. Im going to over build something and not have to do it again.
#173
TECH Fanatic
Thread Starter
#174
TECH Fanatic
Thread Starter
My man Bewley hooked me up with Forced Inductions 88mm turbo. First out 100/91 turbine wheel t6 1.32ar Pretty excited to run this thing.
100mm vs 96mm borg
100mm vs 96mm borg
#175
Did you go with the Next2 upgrade on the block, being your turboed? It was like $800.00 more. Very Nice build you got going there. Should be friggen insane.
#176
TECH Fanatic
Thread Starter
31837111 – LS Next Iron STD Steel STD 9.240” 4.000”
#177
TECH Fanatic
Thread Starter
I bought a motor plate since I have been doing so much ls work lately. The local machine shop to me here in northern michigan has some pretty nice equipment but rarely do this stuff. This turbo is soooooo sexy.