The nations fastest NA LT1 1/4
06-20-2004, 12:56 PM
#1
TECH Fanatic
Thread Starter
Join Date: Jun 2002
Location: kuwait
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
The nations fastest NA LT1 1/4 Hi
Who know more/last info about this car TransAm LT1 1995 and any fastest NA LT1's
The TransAM M6 1995 :
Dave has built the car from the ground up. 1995 Transam now holds the nations fastest NA 6speed LT1 1/4 time, 10.76 @ 131.76. After reaching his goal of being the fastest LT1 Manual car, he is now building a LS1 to drop in
Dave's New LS1 MOTOR on the TransAm 1995
Who know more/last info about this car TransAm LT1 1995 and any fastest NA LT1's
The TransAM M6 1995 :
Dave has built the car from the ground up. 1995 Transam now holds the nations fastest NA 6speed LT1 1/4 time, 10.76 @ 131.76. After reaching his goal of being the fastest LT1 Manual car, he is now building a LS1 to drop in
Dave's New LS1 MOTOR on the TransAm 1995
06-20-2004, 01:48 PM
#4
The 396 had a soild roller cam and ported AFR heads. The run was made through a ford 9-inch with 4.30 gears. Also had a Mcloed twin disc clutch. The car was VERY STREETABLE and got about 25 mpg's on the highway.
The LS1/6-speed that is in it now has a stock bottom end, Hdy cam, and stock valve set of heads that were ported by Dave and myself. It went 11.04 @ 125.64 yesterday at the North/South shoot out. Trapped 127.89 (Yesterday) on one run but only had a 1.74 60 to go with that mph.
As far as I know Tanner has only gone 10.9's NA? But He was running 10.9's yesterday in 1000 + DA. In cooler air he should be able to go faster than 10.76.
The LS1/6-speed that is in it now has a stock bottom end, Hdy cam, and stock valve set of heads that were ported by Dave and myself. It went 11.04 @ 125.64 yesterday at the North/South shoot out. Trapped 127.89 (Yesterday) on one run but only had a 1.74 60 to go with that mph.
As far as I know Tanner has only gone 10.9's NA? But He was running 10.9's yesterday in 1000 + DA. In cooler air he should be able to go faster than 10.76.
Last edited by NB99Z; 06-20-2004 at 02:04 PM.
06-20-2004, 07:14 PM
#7
TECH Fanatic
Thread Starter
Join Date: Jun 2002
Location: kuwait
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by unit213
He said "in the nation". He's in Kuwait so I bet he does have the record. 
GrannySShifting
Joe.. i think the blue Camaro M6? right??
Anyone know what he did with new motor LS1 ?
Trending Topics
06-20-2004, 07:26 PM
#8
TECH Fanatic
Thread Starter
Join Date: Jun 2002
Location: kuwait
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NB99Z
The 396 had a soild roller cam and ported AFR heads. The run was made through a ford 9-inch with 4.30 gears. Also had a Mcloed twin disc clutch. The car was VERY STREETABLE and got about 25 mpg's on the highway.
The LS1/6-speed that is in it now has a stock bottom end, Hdy cam, and stock valve set of heads that were ported by Dave and myself. It went 11.04 @ 125.64 yesterday at the North/South shoot out. Trapped 127.89 (Yesterday) on one run but only had a 1.74 60 to go with that mph.
As far as I know Tanner has only gone 10.9's NA? But He was running 10.9's yesterday in 1000 + DA. In cooler air he should be able to go faster than 10.76.
The LS1/6-speed that is in it now has a stock bottom end, Hdy cam, and stock valve set of heads that were ported by Dave and myself. It went 11.04 @ 125.64 yesterday at the North/South shoot out. Trapped 127.89 (Yesterday) on one run but only had a 1.74 60 to go with that mph.
As far as I know Tanner has only gone 10.9's NA? But He was running 10.9's yesterday in 1000 + DA. In cooler air he should be able to go faster than 10.76.
06-20-2004, 08:41 PM
#9
On The Tree
iTrader: (7)
Join Date: Sep 2002
Location: Milford oh
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fahad
Excuse me.. which car are you talking about ?
He is refering to mine with the details of the 396 and LS1. NB99Z works at my shop, and told me about this thread. He gave a good description of what it was, and is this time. The fact the stock 346 LS1 is running right with the high effort 396 that is at the top of the LT1 M6 set up is a testimant of the LS1s potential. As for someone going faster in the Lt1 6 speed catagory, Im sure it will happen. Eventually.
06-20-2004, 08:59 PM
#10
8 Second 6 Speed Director
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
the Blue all motor lt1 with an Automatic is steve quinns car( 9.71 @ 138.xx mph), the blue 96 SS, m6 on spray is my car, 9.58 @ 141.70 mph. my new mph best is 128.65pmh, and yes 10.91 is best et so far, my rear gear is a 4.11 ratio. a 4.56 would be perfect for motor but crap for spray, i will stick with the 4.11 for purposes of diving into the lower 9's once the bottle goes back in the car.
what was with the track guy flipping out about fluids??? that guy needed some serious help!
what was with the track guy flipping out about fluids??? that guy needed some serious help!
06-21-2004, 09:02 AM
#11
TECH Fanatic
Thread Starter
Join Date: Jun 2002
Location: kuwait
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lt1dave
He is refering to mine with the details of the 396 and LS1. NB99Z works at my shop, and told me about this thread. He gave a good description of what it was, and is this time. The fact the stock 346 LS1 is running right with the high effort 396 that is at the top of the LT1 M6 set up is a testimant of the LS1s potential. As for someone going faster in the Lt1 6 speed catagory, Im sure it will happen. Eventually.
Good luck..
Originally Posted by taner
the Blue all motor lt1 with an Automatic is steve quinns car( 9.71 @ 138.xx mph), the blue 96 SS, m6 on spray is my car, 9.58 @ 141.70 mph. my new mph best is 128.65pmh, and yes 10.91 is best et so far, my rear gear is a 4.11 ratio. a 4.56 would be perfect for motor but crap for spray, i will stick with the 4.11 for purposes of diving into the lower 9's once the bottle goes back in the car.
what was with the track guy flipping out about fluids??? that guy needed some serious help!
what was with the track guy flipping out about fluids??? that guy needed some serious help!
06-21-2004, 09:46 AM
#12
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
All i know is Joe O (all motor lt1 with an Automatic) the fastest & taner in the other side...
Here's a great link bro...
http://www.z28racer.com/famousLT1.htm
Just look @ taner wheelie Fahad...
Here's a great link bro...
http://www.z28racer.com/famousLT1.htm
Just look @ taner wheelie Fahad...
Last edited by bad95killer; 06-21-2004 at 09:54 AM.
06-21-2004, 01:41 PM
#13
8 Second 6 Speed Director
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Fahad
Thanks for your description
Good luck..
Also.. thanks for your description and nice driving. what's the clutch you use it??
Good luck..
Also.. thanks for your description and nice driving. what's the clutch you use it??
06-21-2004, 01:57 PM
#15
8 Second 6 Speed Director
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by PewterZ28
There’s a 1994 N/A LT1 Camaro w/ a manual transmission that runs low 10’s in St. Louis. I could be wrong but I’m 90% sure it is N/A. I’ve always been told his is the fastest N/A manual LT1 in the nation.
06-21-2004, 03:46 PM
#17
9 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: St. Louis, MO
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
The 396 LT1 car is a 1993 and it's got a powerglide. A few weeks back it got squirly and hit the wall here at GIR 
Last edited by badass 2002 z28; 06-21-2004 at 03:56 PM.
06-21-2004, 05:05 PM
#19
Launching!
Join Date: Mar 2004
Location: Elwood, IL
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bad95killer
All i know is Joe O (all motor lt1 with an Automatic) the fastest & taner in the other side...
Here's a great link bro...
http://www.z28racer.com/famousLT1.htm
Just look @ taner wheelie Fahad...
Here's a great link bro...
http://www.z28racer.com/famousLT1.htm
Just look @ taner wheelie Fahad...
