1_slow00z28

What should i be looking at time wise here guys.

ls3 pat g cam
small head work
exhaust
th400 trans

stock 10bolt

T6Rocket

Run it, then we'll all know!

Al

1_slow00z28

i am sat just wondering what it should do that's all.

and nice times to you sir

sillysspeed

iTrader: (21)

Yep best bet is to run it and report back. Without knowing your whole setup its should run good as long as you don't wheel hop with that 10bolt lol

1_slow00z28

6.2L LS3 came out of a 2010 vette
Lingenfelter TRG-002 58x-24x Crank Sensor Trigger Conversion Module
58x - 24x Reluctor Wheel Conversion Module
Pat G Custom Cam
CNC ported heads with ARP Head studs
Double roller timing chain
Meling oil pump
TSP Longtube headers
3 in SLP Loudmouth exhaust
Volant Cold Air Induction

th400
with trans brake and 4k stall

rear end is stock 342 i know i know i need to change it i haven't made it back there yet

Jtm2085

iTrader: (1)

What kind of power did it make?

Aaron at SDPC

What does the car weigh? Any suspension mods done to it?

1_slow00z28

Haven't weighed the car. made right at 500 with a t56 setup havent had it on the dyno since the 400 swap

ragtopz28

iTrader: (57)

Transbrake and a 10 bolt = No Time
If it doesn't break, I'd say 7.0

RENE'S RAGE

iTrader: (96)

7.30's

1_slow00z28

i hoping for 7.50 maybe 7.40

and the trans brake on the 10 bolt FTW Lol, will be ordering mdw 9inch

HioSSilver

iTrader: (8)

If you only run a 7.5 with all that you need to sale and take up knitting.

It should be well into the 6's in the 1/8

sillysspeed

iTrader: (21)

LOL true. With everything dialed in and a decent rear you should have no problem getting in the 6's/10's 1/4 mile.

1_slow00z28

Hiossilver just trying to be on the high side with out snapping the rear first pass

HioSSilver

iTrader: (8)

With a auto your fine. I ran 7.1s maybe a high 7.0x with a 10bolt and a 6 speed.

1_slow00z28

leaving soft with out dumping the clutch ?

HioSSilver

iTrader: (8)

Yup....it would live in the 1.7x 60 range. When i would try for more it would break a axle.

Auto's should live in the 1.6~ range with out much problem.

ragtopz28

iTrader: (57)

^^Agree. I've been numerous 1.5x on mine. Footbraking loads everything up (which I think makes em live).
Footbrake it and see what she does.

1_slow00z28

Thanks guys