Bbc 632 efi??
02-20-2017, 04:47 AM
#1
Teching In
Thread Starter
Join Date: Feb 2017
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Bbc 632 efi?? Came across a World Merlin III block that has never been touched. Was tossing around a few things debating between a 441 LS7, Dart LSx, or World/Bill Mitchell block. My question is for a motor thats 632ci what EFI kit is out there to run this motor with a Procharger F3-135 blower on it? I would like to stay EFI if possible.
02-20-2017, 04:50 AM
#2
Holley EFI, FAST XFI, Haltech, BS3 are all efi setups that can run pretty much any engine combination you can think of. The fuel system will need to be pretty serious for a setup like that (Weldon pump or Big Aeromotive setup). You can buy the stand alone harnesses to work with any setup as well.
02-20-2017, 04:56 AM
#3
Teching In
Thread Starter
Join Date: Feb 2017
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Holley EFI, FAST XFI, Haltech, BS3 are all efi setups that can run pretty much any engine combination you can think of. The fuel system will need to be pretty serious for a setup like that (Weldon pump or Big Aeromotive setup). You can buy the stand alone harnesses to work with any setup as well.
02-28-2017, 01:51 AM
#5
TECH Regular
Join Date: May 2011
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
02-28-2017, 05:39 AM
#6
TECH Enthusiast
I'd look into Haltech 2500-T, along with a set of Moran 500's, and a weldon belt driven pump. That 135 should make north of 2500 pretty easily, especially on that big of a motor. Granted cylinder head and camshaft play a big part of that.
