New motor has some balls...but I need to learn to drive
#1
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
New motor has some *****...but I need to learn to drive
Took the car to cecil last night to try out the new motor.
First run was a "feeler run" I launched nice and easy and took it rather easy down track just to get an initial ATAP reading on the car...
60-foot 1.921 (nice and easy)
330 5.183
1/8 7.805
mph 94.24
1000 10.037
1/4 11.904
mph 121.18
ATAP looked good...28.5 degrees of timing and ZERO KR looked somewhat rich (but I don't trust the O2 sensors right now <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
So I leaned it out a tad and went to make a full pass <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />
2 stepped from 5000 rpm had a good run going and missed 4th gear bad <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> Also forgot to log this run (I hate busy friday nights...can never get in a groove)
60: 1.672
330 4.752
1/8 7.320
mph 93.89
1000 9.668
1/4: 11.597
mph: 118.03
Since it hooked so well I figured to up the 2-step to 5500 rpm <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Good launch but now I missed 3rd gear (I suck haha)
60: 1.652
330 4.806
1/8 7.557
mph 91.81
1000 9.844
1/4: 11.733
mph: 120.06
I just can't win...oh well...it hooked again so lets try 6000 rpm <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> I set it and the 2 step wasn't working off the line so I ended up with a really botched launch which affected my whole run...if something messes up in my routine I get all out of whack
60: 1.839 <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
330 4.963
1/8 7.540
mph 95.58
1000 9.743
1/4: 11.587
mph: 122.71
checked the 2 step after the run and my dumbass set it to 600 rpm instead of 6000 rpm <img border="0" alt="[Banging Head]" title="" src="graemlins/gr_banghead.gif" /> Oh well I'll get it back to the track in the next few weeks (have some work travel coming up next week) Either way running 11.5x missing a gear is really AWESOME and this motor is making some serious HP
<small>[ August 10, 2002, 08:26 AM: Message edited by: Fireball ]</small>
First run was a "feeler run" I launched nice and easy and took it rather easy down track just to get an initial ATAP reading on the car...
60-foot 1.921 (nice and easy)
330 5.183
1/8 7.805
mph 94.24
1000 10.037
1/4 11.904
mph 121.18
ATAP looked good...28.5 degrees of timing and ZERO KR looked somewhat rich (but I don't trust the O2 sensors right now <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
So I leaned it out a tad and went to make a full pass <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />
2 stepped from 5000 rpm had a good run going and missed 4th gear bad <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> Also forgot to log this run (I hate busy friday nights...can never get in a groove)
60: 1.672
330 4.752
1/8 7.320
mph 93.89
1000 9.668
1/4: 11.597
mph: 118.03
Since it hooked so well I figured to up the 2-step to 5500 rpm <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> Good launch but now I missed 3rd gear (I suck haha)
60: 1.652
330 4.806
1/8 7.557
mph 91.81
1000 9.844
1/4: 11.733
mph: 120.06
I just can't win...oh well...it hooked again so lets try 6000 rpm <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> I set it and the 2 step wasn't working off the line so I ended up with a really botched launch which affected my whole run...if something messes up in my routine I get all out of whack
60: 1.839 <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
330 4.963
1/8 7.540
mph 95.58
1000 9.743
1/4: 11.587
mph: 122.71
checked the 2 step after the run and my dumbass set it to 600 rpm instead of 6000 rpm <img border="0" alt="[Banging Head]" title="" src="graemlins/gr_banghead.gif" /> Oh well I'll get it back to the track in the next few weeks (have some work travel coming up next week) Either way running 11.5x missing a gear is really AWESOME and this motor is making some serious HP
<small>[ August 10, 2002, 08:26 AM: Message edited by: Fireball ]</small>
#3
12 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Clarksville, TN
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
My God, on the "feeler" run, you went 121 mph! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
I'm assuming that with your really steep gears, you're shifting to 4th before the 1/8 mi line, and just riding it out the rest of the way, am I right? Even if, what was your 1/8 mi time and mph on there run where you missed 4th, and the "feeler" run? Also, where are you shifting at?
Nice runs for the summer heat man! Can you just imagine how fun of a ride that is gonna be this fall when you get all dialed in, and get back into the groove!! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I'm assuming that with your really steep gears, you're shifting to 4th before the 1/8 mi line, and just riding it out the rest of the way, am I right? Even if, what was your 1/8 mi time and mph on there run where you missed 4th, and the "feeler" run? Also, where are you shifting at?
Nice runs for the summer heat man! Can you just imagine how fun of a ride that is gonna be this fall when you get all dialed in, and get back into the groove!! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#5
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
ok updated the splits above
My shift light is at 6800 (only have the 6K series pills) but it may be better to wind out to 7k?
My shift light is at 6800 (only have the 6K series pills) but it may be better to wind out to 7k?
#6
TECH Junkie
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 3,987
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
Sounds good! That thing will haul some serious *** when you get it dialed in.
I take it you like the new cam then? <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I take it you like the new cam then? <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#7
"The Drag Racing Director"
iTrader: (10)
Re: New motor has some *****...but I need to learn to drive
Fireball,
Great to see ya going to the Track. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
Keep working at it. It took me a few times to get use to the Hot Rod when I 1st got her back from Thunder Racing. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I hope to get the Hot Rod back today so I can race her tomorrow with the new gears 5.14 and the 30x9x15 slicks. <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
Later,
Coach
<small>[ August 10, 2002, 08:59 AM: Message edited by: Coach 02 M6 Z/28 ]</small>
Great to see ya going to the Track. <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
Keep working at it. It took me a few times to get use to the Hot Rod when I 1st got her back from Thunder Racing. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I hope to get the Hot Rod back today so I can race her tomorrow with the new gears 5.14 and the 30x9x15 slicks. <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
Later,
Coach
<small>[ August 10, 2002, 08:59 AM: Message edited by: Coach 02 M6 Z/28 ]</small>
Trending Topics
#9
Re: New motor has some *****...but I need to learn to drive
Congrats man thats great!
Wait till fall heheheh <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Chris
Wait till fall heheheh <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Chris
#10
I can shift faster than you.
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
Looks good Brian! Quit missing gears and the times will fall. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
Jason
Jason
#12
TECH Addict
Join Date: Dec 2001
Location: Fort Worth,TX
Posts: 2,340
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Street Racer:
<strong>Damn sounds like the new set up is working pretty good even for missing a few gears</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">No kidding.He can beat alot of people just by the way he is driving now.
<strong>Damn sounds like the new set up is working pretty good even for missing a few gears</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">No kidding.He can beat alot of people just by the way he is driving now.
#13
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
Thanks guys...I think this combo has some extremely low 11s if not high 10s in it with some better driving <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> and some tuning...
I just redid my LS1 edit file and added 2 more degrees of timing at 4500+ rpm and adjusted the MAF table a tad to bring my LTRIMS (and hopefully my WOT) down some.
May hit the track Saturday if I'm not too tired (I'm on travel right now in San Diego and am not scheduled to arrive back in MD until 1AM Sat morning <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> )
I just redid my LS1 edit file and added 2 more degrees of timing at 4500+ rpm and adjusted the MAF table a tad to bring my LTRIMS (and hopefully my WOT) down some.
May hit the track Saturday if I'm not too tired (I'm on travel right now in San Diego and am not scheduled to arrive back in MD until 1AM Sat morning <img border="0" title="" alt="[Sad]" src="gr_sad.gif" /> )
#14
LSX Mechanic
iTrader: (89)
Re: New motor has some *****...but I need to learn to drive
Kick *** Brian. Your car should be good for 124-125 mph in cold weather, and driving <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> . That's would kick *** man, go run some 10's and hold down the fort for us M6 guys <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Josh
PS- What was your race weight?
<small>[ August 13, 2002, 12:21 AM: Message edited by: Damian ]</small>
Josh
PS- What was your race weight?
<small>[ August 13, 2002, 12:21 AM: Message edited by: Damian ]</small>
#15
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
well last time I weighed it was 3605 with me...since then I've done !Front Seat and a tubular K-member...
I'm guessing ~3550 or so maybe a tad more <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
I'm guessing ~3550 or so maybe a tad more <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
#16
TECH Fanatic
Join Date: Aug 2002
Location: Objects in mirror no longer matter.
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Fireball:
<strong>ok updated the splits above
My shift light is at 6800 (only have the 6K series pills) but it may be better to wind out to 7k?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Put it on a dyno and find out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<strong>ok updated the splits above
My shift light is at 6800 (only have the 6K series pills) but it may be better to wind out to 7k?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Put it on a dyno and find out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#17
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Fenris Ulf:
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Fireball:
<strong>ok updated the splits above
My shift light is at 6800 (only have the 6K series pills) but it may be better to wind out to 7k?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Put it on a dyno and find out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Don't worry..I will <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Fireball:
<strong>ok updated the splits above
My shift light is at 6800 (only have the 6K series pills) but it may be better to wind out to 7k?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Put it on a dyno and find out <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Don't worry..I will <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#19
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: New motor has some *****...but I need to learn to drive
on the street, it takes some getting used too haha...the cam DOES NOT like less than 2000 rpm and it has serious traction problems in 1st and 2nd gear <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />